Trendingat

02Home & Garden · Updated

Crepe Pan UK: What to Look For

Short answer

A shallow, flat pan for making thin French pancakes

A crepe pan is a wide, low-sided frying pan designed to cook thin, even crepes. In the UK, look for a pan that heats evenly and has a smooth, non-stick surface.

Best materialCarbon steel or non-stickExplained in: Materials: Which Is Best?
Key featureLow, sloped sidesExplained in: Key Features to Look For
Reading time6 min11 sections, about 1,490 words

What Is a Crepe Pan?

A crepe pan is a specialised frying pan with very low sides (usually 1–2 cm) and a flat, smooth cooking surface. The low sides allow you to slide a spreader or tilt the pan to swirl the batter thinly across the whole base. Unlike a standard frying pan, a crepe pan has no ridges or non-stick coating patterns that could tear the delicate crepe. The flat surface ensures the batter spreads evenly, giving you a uniform thickness and a golden, lacy edge.

Why Use a Dedicated Crepe Pan?

You can make crepes in a regular frying pan, but a dedicated crepe pan makes the process easier and more consistent. The low sides mean you can flip the crepe with a spatula without hitting the rim. The wide, flat base gives you more room to spread the batter thinly. And because crepe pans are usually lighter than standard pans, you can tilt and swirl them with one hand while pouring batter with the other. If you make crepes often, a dedicated pan is worth the cupboard space. If you only make them occasionally, a good non-stick frying pan with low sides will work fine.

Key Features to Look For

When choosing a crepe pan in the UK, consider these features:

  • Diameter: 24–28 cm is ideal for home use. A 24 cm pan makes crepes that fit on a standard dinner plate. A 28 cm pan gives you more room but can be heavier.
  • Sides: Look for sides that are 1–2 cm high and slightly sloped. This makes it easy to slide a spatula under the crepe and flip it.
  • Handle: A long, heat-resistant handle keeps your hand away from the heat. Some pans have a small helper handle opposite the main one, which helps when lifting the pan.
  • Weight: A lighter pan is easier to tilt and swirl. Carbon steel and aluminium pans are lighter than cast iron.
  • Compatibility: Check if the pan is suitable for your hob type (gas, electric, induction). Not all pans work on induction hobs.

Materials: Which Is Best?

Crepe pans come in several materials, each with pros and cons:

  • Non-stick coated aluminium: The easiest to use. You need less butter or oil, and crepes release easily. The coating can scratch, so use wooden or silicone utensils. These pans are usually light and affordable.
  • Carbon steel: A favourite among professional crepe makers. It heats quickly and evenly, and develops a natural non-stick seasoning over time. It requires seasoning before first use and occasional maintenance to prevent rust. It is heavier than aluminium but lighter than cast iron.
  • Cast iron: Retains heat very well, giving a consistent temperature. It is heavy, so tilting and swirling can be tiring. It also needs seasoning and is slower to heat up. Some cooks prefer it for the even browning.
  • Stainless steel: Durable and dishwasher-safe, but crepes tend to stick unless you use plenty of butter. Not the best choice for beginners.

For most home cooks in the UK, a non-stick coated aluminium pan is the most practical. If you want a traditional feel and are willing to maintain it, carbon steel is excellent.

How to Use a Crepe Pan

Using a crepe pan is simple once you get the hang of it. Here’s a step-by-step guide:

  1. Heat the pan: Place the pan over medium heat. It should be hot enough that a drop of water sizzles and evaporates quickly. If it smokes, it’s too hot.
  2. Add a little butter or oil: Use a paper towel to spread a thin layer over the surface. You only need a small amount; too much makes the batter slide around.
  3. Pour the batter: Use a ladle or a small measuring cup to pour about 60 ml (¼ cup) of batter into the centre of the pan. The amount depends on the pan size.
  4. Swirl immediately: Tilt and rotate the pan so the batter spreads evenly across the base. Work quickly before the batter sets.
  5. Cook until the edges lift: After 1–2 minutes, the edges will start to brown and pull away from the pan. The top should look set and no longer wet.
  6. Flip and cook the other side: Use a thin spatula to loosen the edges, then flip the crepe. Cook for another 30–60 seconds until lightly golden.
  7. Slide onto a plate: Slide the crepe out of the pan. Repeat with the remaining batter, adding a little more butter if needed.

Common mistakes include using too high heat (which burns the crepe before it cooks through) and pouring too much batter (which makes a thick, doughy crepe). Practise makes perfect.

Common Problems and How to Fix Them

Even with a good pan, you might run into issues. Here are typical problems and their solutions:

  • Crepes stick to the pan: Either the pan isn’t hot enough, or you need more butter. Ensure the surface is well-coated and the pan is properly preheated.
  • Crepes are too thick: You’re using too much batter. Use less, and swirl faster to spread it thinly.
  • Crepes tear when flipping: The crepe may be undercooked. Wait until the edges are golden and the top is set before flipping. Also, use a thin, flexible spatula.
  • Uneven browning: This happens if the pan has hot spots. Move the pan around the hob to distribute heat, or choose a pan with a thicker base.
  • First crepe is always bad: This is normal. The pan isn’t yet at the right temperature, and the seasoning isn’t established. Discard the first one and continue.

Crepe Pan vs. Frying Pan

You don’t need a special crepe pan if you already own a good non-stick frying pan. The main differences are:

  • Sides: A frying pan has higher, often curved sides. A crepe pan has low, straight sides.
  • Surface: Frying pans may have a slightly textured surface, while crepe pans are perfectly smooth.
  • Weight: Crepe pans are usually lighter for easier swirling.

If you use a frying pan, choose one with low sides and a flat bottom. A 24–26 cm non-stick frying pan works well. The main drawback is that the higher sides can make flipping more awkward.

Cost and Where to Buy

Crepe pans in the UK range from budget to premium. You can find them in kitchenware shops, department stores, and online retailers. Prices vary based on material, brand, and size. Non-stick aluminium pans are usually the most affordable, while carbon steel and cast iron are more expensive. You don’t need to spend a lot to get a decent pan. A mid-range non-stick pan will serve most home cooks well.

Safety and Care

Always follow the manufacturer’s instructions for your specific pan. Here are general tips:

  • Use the right utensils: For non-stick pans, use wooden, silicone, or plastic utensils to avoid scratching the coating.
  • Don’t overheat: Non-stick coatings can release fumes if heated to very high temperatures. Keep the heat on medium.
  • Clean properly: Let the pan cool before washing. Use warm soapy water and a soft sponge. Avoid abrasive cleaners.
  • Season carbon steel and cast iron: These pans need to be seasoned before first use and occasionally after cleaning. Dry them thoroughly to prevent rust.
  • Store carefully: If you stack pans, place a cloth or paper towel between them to protect the surface.

Frequently Asked Questions

Can I use a crepe pan on an induction hob?

Some crepe pans are induction-compatible, but not all. Check the product description or packaging for the induction symbol. If you have an induction hob, look for a pan with a magnetic stainless steel or cast iron base.

Do I need to season a non-stick crepe pan?

No, non-stick pans are ready to use out of the box. Carbon steel and cast iron pans require seasoning before first use.

What size crepe pan is best for a family?

A 28 cm pan is ideal for making crepes for a family, as it produces larger crepes that are easier to fill. A 24 cm pan is fine for one or two people.

Can I use a crepe pan for other foods?

Yes, you can use it for pancakes, eggs, tortillas, or even grilled sandwiches. Its low sides make it versatile for any flat, quick-cooking food.

Why does my first crepe always stick?

The pan isn’t yet at the right temperature, and the surface may not be fully coated. Heat the pan thoroughly and add a little more butter for the first crepe. It’s normal to discard it.

Further reading: none, this is general know-how. Details can change, so check the official page for anything that matters to you. Spotted a mistake? Tell us. How we write an answer.