Trendingat

02Home & Garden · Updated

How to Change Ink Cartridge in HP Printer

Short answer

Open the access door, swap the cartridge, close it

To change the ink cartridge, turn on the printer, open the cartridge access door, wait for the carriage to stop, then press down on the old cartridge to release it. Slide the new cartridge in at a slight angle until it clicks, then close the door.

You needA new HP ink cartridgeExplained in: Tips
Watch outDon't touch the copper contactsExplained in: Step-by-Step
Reading time5 min7 sections, about 1,170 words

Changing an ink cartridge in an HP printer is a routine task that keeps your prints sharp and your printer running smoothly. Most HP printers use a similar process: open the cartridge access door, wait for the carriage to stop, release the old cartridge, snap in the new one, and close the door. You’ll know it worked when the printer recognizes the new cartridge and prints a test page.

What You’ll Need

  • A new HP ink cartridge (check your printer model for the correct cartridge number)
  • A soft, lint-free cloth (optional, for cleaning contacts)
  • Your printer’s power cord (to keep it plugged in during the process)

Step-by-Step

  1. Turn on the printer. Plug it in and press the power button. The carriage (the part that holds the cartridges) must be able to move to the access position. If the printer is off, the carriage will be locked.
  2. Open the cartridge access door. This is usually the top or front panel that swings open. Wait for the carriage to slide to the center and stop. If it doesn’t move, check that the printer is on and there’s no paper jam blocking it.
  3. Remove the old cartridge. Press down firmly on the top of the cartridge until it clicks, then pull it straight up and out. Set it aside (you can recycle it later).
  4. Prepare the new cartridge. Take the new cartridge out of its packaging. Remove the orange protective cap and the plastic tape covering the copper contacts. Do not touch the copper contacts or the ink nozzles—this can cause clogs or poor contact.
  5. Insert the new cartridge. Hold it with the copper contacts facing toward the printer (usually down and toward the back). Slide it into the empty slot at a slight angle, then push it up until it clicks into place. The click means it’s seated correctly.
  6. Close the access door. Gently push the door shut until it latches. The printer will automatically align the cartridges and print a test page (if you have that feature enabled). If not, you can print a test page from your computer or printer settings.
  7. Check the ink levels (optional). On your computer, open the HP Smart app or the printer software to see the estimated ink levels. This confirms the cartridge was recognized.

Common Mistakes

  • Forgetting to remove the tape or cap. The orange cap and plastic tape protect the cartridge during shipping. If you leave them on, the printer won’t read the cartridge and may show an error.
  • Touching the copper contacts. The copper strips are sensitive; oils from your skin can cause poor electrical contact, leading to “cartridge not detected” errors.
  • Using the wrong cartridge. Each HP printer model uses a specific cartridge number (e.g., HP 63, HP 67, HP 305). Check your printer’s manual or the old cartridge label before buying a replacement.
  • Pulling the cartridge out at an angle. Pull straight up to avoid bending the contacts inside the carriage.
  • Closing the door too soon. The carriage must be fully stopped before you close the door, or the printer may jam.

Tips

  • Keep the printer on. Always change cartridges with the printer powered on so the carriage is unlocked and positioned correctly.
  • Use genuine HP cartridges. While third-party cartridges may be cheaper, they can leak or cause print quality issues. Genuine HP cartridges are designed for your printer model.
  • Store spare cartridges properly. Keep them in their sealed packaging until needed, and store them upright in a cool, dry place.
  • Clean the contacts if needed. If you get a “cartridge not detected” error, remove the cartridge and gently wipe the copper contacts with a dry, lint-free cloth. Avoid using water or cleaning solutions.
  • Recycle old cartridges. HP offers a free recycling program (HP Planet Partners) where you can mail back used cartridges.

Troubleshooting

  • Cartridge not detected. Remove the cartridge, check that the protective tape is removed, and reinsert it firmly until it clicks. If the problem persists, clean the copper contacts with a dry cloth and try again.
  • Printer shows “Incompatible cartridge.” This usually means the cartridge is not meant for your printer model. Double-check the cartridge number and ensure it’s genuine HP. If it’s a third-party cartridge, it may not be recognized.
  • Ink not flowing or print quality is poor. Run the printer’s cleaning cycle from the HP Smart app or the printer’s control panel. If that doesn’t help, try the “Align Cartridges” option. If the issue continues, the cartridge may be defective—contact HP support.
  • Carriage won’t move. Make sure the printer is on and there’s no paper jam. If the carriage is stuck, gently push it to the side (if it’s not locked) or turn the printer off and on again.
  • Ink levels show empty even after replacement. Sometimes the printer needs a few minutes to update. Print a test page or check the ink levels again after 10 minutes. If it still shows empty, the cartridge may be faulty.
  • Printer prints blank pages. This can happen if the nozzle is clogged. Run the cleaning cycle two or three times. If it still prints blank, the cartridge may be out of ink or damaged.

Frequently Asked Questions

How often should I change the ink cartridge?

There’s no set schedule—it depends on how much you print. When prints look faded or streaky, or your printer shows a low ink warning, it’s time to replace the cartridge.

Can I change just one cartridge if it’s empty?

Yes, you can replace only the empty cartridge (black or color). The other can stay in place. Just make sure you insert the new one in the correct slot.

Do I need to turn off the printer before changing the cartridge?

No, keep the printer on. Turning it off can lock the carriage, making it impossible to access the cartridges.

What should I do with the old cartridge?

Recycle it through HP’s free Planet Partners program. You can also check if your local office supply store offers recycling drop-offs.

Why does my printer say “cartridge not detected” even after installing a new one?

This usually means the copper contacts are dirty or the cartridge isn’t seated properly. Remove the cartridge, clean the contacts with a dry cloth, and reinsert it firmly until you hear a click.

Can I use a refilled cartridge?

You can, but refilled cartridges may leak or cause print quality issues, and they might not be recognized by the printer. Genuine HP cartridges are recommended for best results.

Further reading: HP Support. Details can change, so check the official page for anything that matters to you. Spotted a mistake? Tell us. How we write an answer.