Trendingat

02Home & Garden · Updated

How to Change a Word in Word All at Once

Short answer

Use Find and Replace (Ctrl+H) to swap every instance at once

Open the Find and Replace dialog with Ctrl+H, type the word you want to change and the replacement, then click Replace All. This instantly updates every occurrence in the document.

ShortcutCtrl+H opens Find and ReplaceExplained in: Step-by-Step
ScopeReplaces all instances in the documentExplained in: Step-by-Step
Watch outIt also changes words inside other wordsExplained in: Step-by-Step
Reading time5 min7 sections, about 1,120 words

What You’ll Need

  • Microsoft Word (desktop, web, or mobile) with the document open
  • The exact word you want to change and the replacement word

Step-by-Step

  1. Open the Find and Replace dialog. Press Ctrl+H on Windows or Command+Shift+H on Mac. Alternatively, go to the Home tab, click the Replace button (usually on the far right of the editing group). In Word for the web, click Find (or press Ctrl+F) and then select the Replace tab.
  2. Enter the word to find. In the Find what box, type the exact word you want to change. Be careful with capitalization—Find and Replace is case-sensitive only if you enable it (see Tips).
  3. Enter the replacement word. In the Replace with box, type the new word. Leave this box empty if you want to delete the word entirely.
  4. Choose the scope (optional). If you want to limit the replacement to a specific section, select that text first before opening the dialog. Otherwise, Word will search the entire document.
  5. Click Replace All. Word will scan the document and replace every occurrence. A message will pop up telling you how many replacements were made. Click OK to dismiss it.
  6. Review the changes. After replacing, check the document for any unintended changes, especially if the word appeared as part of another word (e.g., changing “cat” to “dog” would turn “catfish” into “dogfish”).
  7. Undo if needed. If you’re not happy with the result, press Ctrl+Z (or Command+Z on Mac) to undo the replacement. You can also use the Replace button (instead of Replace All) to step through each occurrence one by one.

Common Mistakes

  • Not using exact match. If you type “cat” without enabling “Match case,” Word will also replace “Cat” and “CAT”. This might be fine, but be aware.
  • Replacing part of a word. As mentioned, “cat” will match “catfish” and “concatenate”. To avoid this, use the Find whole words only option (see Tips).
  • Forgetting to check the replacement. If you replace “color” with “colour,” you might accidentally change “colorful” to “colourful”—which might be intended or not.
  • Replacing in the wrong document. Ensure you have the correct document open before pressing Replace All. If you have multiple Word windows, check the title bar.
  • Not saving a backup. If the document is important, save a copy before doing a global replace, especially if you’re not 100% sure of the changes.

Tips

  • Use wildcards for complex patterns. In the Find and Replace dialog, click More (or the down arrow) and check Use wildcards. This lets you find patterns like “col?r” to match “color” and “colour” (using ? for a single character).
  • Match case for proper nouns. If you’re changing a name like “smith” to “jones,” enable Match case to avoid changing “Smith” to “jones” (or vice versa).
  • Find whole words only. Check this option to ensure you only replace standalone words. For example, changing “can” to “may” won’t affect “cannot” or “scanner”.
  • Use Replace instead of Replace All for safety. If you want to review each occurrence, click Replace to go one by one. This is slower but gives you full control.
  • Use the navigation pane for a quick overview. Press Ctrl+F to open the Navigation Pane, type the word, and you’ll see all instances highlighted. This helps you gauge how many changes will occur.
  • Replace formatting too. In the Find and Replace dialog, click More, then select Format to specify formatting (e.g., bold, italic) for the find or replace text. This lets you change a word only when it’s bold, for instance.

Troubleshooting

  • No replacements were made. Double-check the spelling and capitalization. If the word is in a text box, header, footer, or footnote, Word may not find it by default. In the Find and Replace dialog, click More and ensure Search is set to All (not Down or Up). Also, check if the text is in a table or a text box—sometimes you need to select that area separately.
  • The replacement changed too much. Use Undo (Ctrl+Z) immediately. Then redo the replace with the Find whole words only option or use Replace to step through.
  • Find and Replace is grayed out. This can happen if the document is protected or in a read-only mode. Save a copy, then try again. If the document is shared, you might need to stop sharing or check with the owner.
  • Replacement isn’t working in headers or footers. By default, Find and Replace covers the main body. To replace in headers/footers, you need to open the header/footer area (double-click it) and then run Find and Replace while it’s active.
  • Word for the web doesn’t have all options. The web version has a simpler Find and Replace. If you need advanced options like wildcards, open the document in the desktop app.

Frequently Asked Questions

Can I change a word in all documents at once?

No, Find and Replace works only within the current document. To change a word in multiple documents, you’d need to open each one and repeat the process, or use a macro (for advanced users).

How do I replace a word with a different font or color?

In the Find and Replace dialog, click More, then select Format and choose Font to set the formatting for the replacement text. You can also use this to find text with specific formatting.

What if I want to replace only the first occurrence?

Use the Replace button instead of Replace All. It will replace the first occurrence and then you can click Find Next to skip it if you want.

Can I use Find and Replace to delete a word?

Yes, leave the Replace with box empty and click Replace All. This removes every instance of the word.

Why did Word replace “cat” in “category”?

Because Find and Replace matches any part of a word by default. To avoid this, check Find whole words only in the options.

Does Find and Replace work with special characters like tabs or paragraph marks?

Yes, you can use special codes. In the Find what box, click More and then Special to insert codes like ^t for a tab or ^p for a paragraph mark.

Further reading: Microsoft Support. Details can change, so check the official page for anything that matters to you. Spotted a mistake? Tell us. How we write an answer.