02Home & Garden · Updated
How to Get Rid of Zebra Mussels
Short answer
Kill them with hot water, desiccation, or approved molluscicides
Zebra mussels are invasive and hard to eliminate once established. For small infestations on boats or equipment, use hot water or let items dry completely; for larger areas, consult local authorities for approved treatments.
What You’ll Need
- Protective gloves and goggles
- Scraper or putty knife
- Pressure washer (optional)
- Hot water source (steam cleaner or boiler)
- Approved molluscicide (only with permits)
- Tarps or plastic sheeting
- Bleach or vinegar for cleaning (on boats)
Step-by-Step
- Identify the infestation. Zebra mussels are small, D-shaped, and have alternating light and dark stripes. They cluster on hard surfaces like docks, boat hulls, and pipes. Confirm it’s zebra mussels, not native mussels, before acting.
- Check local regulations. Many states require permits for chemical treatments or have specific disposal rules. Contact your local aquatic invasive species coordinator or extension office before starting.
- Remove the item from water. If you’re treating a boat, dock float, or other movable structure, take it out of the water. This is the easiest time to work and prevents larvae from spreading.
- Scrape off visible mussels. Use a scraper or putty knife to remove as many as possible. Collect the mussels in a tarp or bucket—do not let them fall back into the water.
- Apply heat. Use a pressure washer with hot water (at least 140°F) or a steam cleaner to kill remaining mussels and larvae. Focus on crevices and joints. The heat denatures their proteins and kills them quickly.
- Dry thoroughly. Leave the item out in the sun for at least 5–7 days in dry conditions. Zebra mussels can survive out of water for several days, but prolonged desiccation kills them. In humid climates, extend the drying time.
- Dispose of debris properly. Place scraped mussels and dead shells in a sealed bag and throw in the trash. Do not compost or dump them near water.
- For fixed structures (docks, intake pipes). If you can’t remove them, consider hiring a professional to apply an approved molluscicide or use a high-pressure hot water system. Always follow permit requirements.
- Prevent re-infestation. After cleaning, apply an anti-fouling paint (for boats) or install a filter on water intakes. Regularly inspect and clean your equipment.
Common Mistakes
- Using chlorine bleach in open water. Bleach is toxic to aquatic life and often illegal. It’s only safe for small, contained items like boat bilges, and even then, use with caution and follow local rules.
- Not drying long enough. Zebra mussels can survive out of water for up to 5 days, especially in cool, damp conditions. A quick wipe won’t work.
- Dumping mussels back into the water. Even dead mussels can carry larvae. Always dispose of them in the trash.
- Treating only visible adults. Microscopic larvae (veligers) can be in water trapped in bilges or live wells. Drain all water and dry those areas too.
- Ignoring local laws. Using unapproved chemicals can harm native species and lead to fines.
Tips
- Act early—small infestations are much easier to manage than large ones.
- Use a 10% bleach solution for cleaning boat hulls on land (rinse thoroughly before returning to water).
- For docks, consider replacing wooden or concrete surfaces with smooth metal or plastic that mussels can’t grip as well.
- Freeze small items (like anchors) for 48 hours—freezing also kills mussels.
- If you’re in a lake community, work together with neighbors to treat shared structures.
Troubleshooting
- Mussels keep coming back. You likely missed larvae in trapped water. Drain all water from boat compartments, motors, and gear. Repeat the drying process.
- Hot water isn’t available. Use a propane torch carefully on metal surfaces (not on fiberglass or wood). Or rely on extended drying.
- Infestation is too large for DIY. Contact your state’s department of natural resources or a licensed aquatic pest control company. They have specialized equipment and permits.
- Mussels are in a lake intake pipe. This requires professional treatment—often using a molluscicide like EarthTec QZ or a thermal flush. Do not attempt chemical treatment yourself.
- You’re worried about spreading them. Disinfect all equipment with hot water or a bleach solution before moving to another water body.
Frequently Asked Questions
Can zebra mussels be completely eradicated from a lake?
Once established in a large water body, complete eradication is nearly impossible. Management focuses on controlling spread and reducing damage to infrastructure.
Are zebra mussels harmful to humans?
They aren’t directly harmful, but their sharp shells can cut skin, and they can harbor bacteria. Wear gloves when handling them.
Will vinegar kill zebra mussels?
Vinegar is acidic and can kill mussels on contact, but it’s not practical for large areas. It works on small items if soaked for several hours.
How long can zebra mussels survive out of water?
They can survive up to 5 days in moist conditions, but in dry, sunny conditions, they die within 24–48 hours.
Can I use salt to kill zebra mussels?
Salt can kill them, but it’s harmful to freshwater ecosystems and often illegal. Avoid using it in or near natural waters.
What should I do if I find zebra mussels on my boat?
Clean it immediately using hot water or drying, and report the sighting to your local natural resources agency to help track spread.
Related
- Why Do Dogs Yawn When Petted? Causes Explained
- Car Shudders When Braking: Causes & Fixes
- How to Get Rid of Wasps Outdoors
Further reading: USGS. Details can change, so check the official page for anything that matters to you. Spotted a mistake? Tell us. How we write an answer.