02Home & Garden · Updated
How to Grow Kelp: A Step-by-Step Guide
Short answer
Kelp is grown by attaching young plants to ropes and letting them grow in cold, nutrient-rich seawater
Growing kelp requires permits, a suitable marine site, and the right equipment. You'll start with juvenile kelp (sporophytes) attached to seeded twine, which is then wrapped around ropes and suspended in the water column.
What You’ll Need
- Marine farming permit (local/state)
- Access to cold, clean ocean water (or a large tank with artificial seawater)
- Kelp seed (juvenile sporophytes on twine) from a hatchery
- Ropes (polypropylene or similar) for growing lines
- Floats (buoys) and anchors
- Mooring system (chain, rope, shackles)
- Boat and safety gear (if ocean farming)
- Scales and harvesting knives
Step-by-Step
- Get a permit and choose a site. Contact your state’s coastal management agency to obtain a marine aquaculture permit. Select a site with cold water (45–60°F), good water exchange, and some wave protection. Avoid areas with heavy boat traffic or pollution.
- Set up the growing structure. Install anchors at each end of your grow area. Run horizontal ropes (grow lines) between anchors, keeping them a few feet below the surface using buoys. The lines should be taut but able to move with currents.
- Obtain kelp seed. Purchase seeded twine from a commercial hatchery. This twine has microscopic juvenile kelp attached. Keep it moist and cool until deployment.
- Seed the grow lines. Wrap the seeded twine around your grow lines, spacing it evenly. Secure the ends with zip ties or knots. This is typically done in late fall or early winter when water temperatures are cool but before the roughest winter storms.
- Monitor and maintain. Check your lines regularly for damage, excessive biofouling (other organisms growing on the kelp), or breakage. Remove any loose kelp or debris. Adjust buoyancy as needed.
- Thin if necessary. If kelp plants are too crowded, they may become thin and spindly. Thin by gently pulling out smaller plants, leaving room for the rest to grow.
- Harvest. Kelp is ready to harvest in late spring to early summer, when it has reached lengths of 10–15 feet or more. Cut the fronds above the holdfast (the root-like base) with a sharp knife, leaving the base attached so it can regrow if desired. Haul the cut kelp onto your boat.
Common Mistakes
- Planting too late: If you seed after winter storms, the young kelp may not establish before spring warming. Stick to the late fall/early winter window.
- Ignoring water quality: Kelp is sensitive to pollution and low salinity. Choose a site with good water quality and avoid areas with freshwater runoff.
- Overcrowding: Too many plants on a line will compete for light and nutrients, resulting in slow growth. Follow the hatchery’s recommended spacing.
- Not securing lines properly: Strong currents can snap lines or drag anchors. Use heavy-duty hardware and inspect often.
- Harvesting too early: Harvesting before the kelp has reached full size reduces yield. Wait until the blades are long and thick.
Tips
- Choose a site with natural nutrient upwelling or add supplemental nutrients if growing in a tank.
- Use a boat with a winch to make harvesting easier.
- Work with a local university extension program or hatchery for advice on site selection and seed sources.
- Keep a log of water temperature, growth rates, and any issues to improve future seasons.
- Consider growing kelp alongside shellfish like oysters or mussels – they benefit from each other’s presence.
Troubleshooting
- Kelp is not growing: Check water temperature (too warm) and nutrient levels. Consider moving to a deeper or more current-swept site.
- Kelp is covered in other organisms: Biofouling like bryozoans can smother kelp. Increase water flow by raising lines or moving to a site with stronger currents.
- Lines breaking: Strengthen your mooring system, add more buoys for flotation, or move to a more sheltered location.
- Kelp is being eaten: Fish, sea urchins, and other grazers may feed on young kelp. Use protective mesh around the lines or choose a site with fewer grazers.
- Kelp is slimy or rotting: This may indicate poor water quality or disease. Remove affected plants and test water parameters.
Frequently Asked Questions
How long does kelp take to grow?
Kelp typically takes 4 to 7 months from seeding to harvest, depending on water temperature and nutrient availability.
Can I grow kelp in a home aquarium?
Yes, but it’s challenging. You need a large, cold-water tank with strong lighting and nutrient supplementation. Most home aquarists find it difficult to maintain the low temperatures required.
Do I need a permit to grow kelp?
Yes, in most coastal areas you need a marine aquaculture permit from your state or local government. Even for research, special permits are often required.
What is the best water temperature for kelp?
Kelp grows best in water between 45°F and 60°F. It stops growing above 65°F.
Can kelp be grown in the open ocean?
Yes, but you need a robust mooring system to withstand waves and currents. Many commercial farms are in nearshore waters with some protection.
Is kelp farming sustainable?
Yes, kelp farming is considered highly sustainable because it requires no freshwater, fertilizer, or land, and it provides habitat for marine life.
Related
- Why Is My Lawn Grass Turning Yellow? Causes
- Why Do We Celebrate Chinese New Year? Origins & Meaning
- Why Is My Lawn Turning Yellow? Causes & Fixes
Further reading: NOAA Fisheries. Details can change, so check the official page for anything that matters to you. Spotted a mistake? Tell us. How we write an answer.