Trendingat

02Home & Garden · Updated

How to Plant a Fig Tree in Ground: Step-by-Step

Short answer

Dig a wide, shallow hole and plant the fig tree at the same depth it was in its pot

Fig trees thrive in well-drained soil with full sun. Plant them in early spring or fall, spacing them 10-20 feet apart, and water deeply after planting.

Best timeEarly spring or fallExplained in: Tips
Sun neededFull sun (6+ hours)Explained in: Step-by-Step
Spacing10-20 feet apartExplained in: Step-by-Step
Reading time5 min7 sections, about 1,160 words

What You’ll Need

  • Fig tree sapling (bare-root or potted)
  • Shovel or spade
  • Garden fork (optional, for loosening soil)
  • Compost or aged manure (optional)
  • Mulch (wood chips, straw, or leaves)
  • Watering can or hose
  • Stakes and ties (if planting in a windy spot)

Step-by-Step

  1. Choose the right location. Pick a spot with full sun (at least 6 hours of direct sunlight daily) and well-drained soil. Avoid low areas where water pools. If you live in a cool climate, a south-facing wall provides extra warmth and protection.
  2. Prepare the soil. Test drainage by digging a 1-foot hole and filling it with water; it should drain within 30 minutes. If drainage is poor, mix in compost or plant in a raised bed. Loosen the soil in a circle about 3 feet wide and 1 foot deep.
  3. Soak bare-root trees. If your fig is bare-root, soak the roots in water for 1-2 hours before planting. Potted figs should be watered thoroughly the day before.
  4. Dig the hole. Dig a hole that is twice as wide as the root ball and just as deep. The depth is crucial: the top of the root ball should sit level with the surrounding soil. Planting too deep can cause stem rot.
  5. Place the tree. Gently remove the fig from its pot (if potted) and loosen any circling roots. Set the tree in the center of the hole. For bare-root trees, spread the roots out evenly.
  6. Backfill the hole. Fill the hole with the soil you removed, pressing down lightly to remove air pockets. Do not add fertilizer at planting time; it can burn the roots. Water thoroughly to settle the soil.
  7. Water deeply. Give the tree 5-10 gallons of water immediately after planting. This settles the soil and helps roots establish. Keep the soil consistently moist (but not soggy) for the first growing season.
  8. Mulch around the base. Apply a 2-4 inch layer of mulch (wood chips, straw, or leaves) in a circle around the tree, keeping it a few inches away from the trunk. Mulch retains moisture and regulates soil temperature.
  9. Stake if needed. If your area is windy or the tree is top-heavy, drive a stake into the ground next to the trunk and secure it with a soft tree tie. Remove the stake after the first year.

Common Mistakes

  • Planting too deep. This is the most common error. Fig trees planted too deep are prone to root rot and poor growth. Always keep the root ball level with the ground.
  • Overwatering. Fig trees hate soggy roots. Water deeply but infrequently, letting the top inch of soil dry out between waterings. Overwatering leads to yellow leaves and root rot.
  • Choosing the wrong spot. Planting in shade or in a low-lying frost pocket can stunt growth and reduce fruit production. Figs need full sun and good air circulation.
  • Fertilizing at planting. Adding fertilizer to the planting hole can burn tender roots. Wait until the tree shows new growth, then feed lightly with a balanced fertilizer.
  • Ignoring hardiness. Most fig varieties are hardy to USDA zones 7-10. In colder zones, choose a cold-hardy variety like ‘Chicago Hardy’ or plan to protect the tree in winter.

Tips

  • Plant in spring. Spring planting gives the tree a full season to establish roots before winter. Fall planting is okay in mild climates, but avoid planting in summer heat.
  • Space appropriately. Fig trees can grow 15-30 feet tall and wide. Give them plenty of room, or plan to prune regularly to keep them smaller.
  • Consider a container. If you have limited space or cold winters, plant your fig in a large pot (at least 15 gallons) and move it indoors during winter.
  • Prune for shape. After planting, prune back about one-third of the branches to encourage strong root growth. Remove any broken or crossing branches.
  • Protect from frost. In cooler zones, wrap the trunk with burlap or pile leaves around the base in late fall to protect against freezing.

Troubleshooting

  • Leaves turning yellow. This usually means overwatering or poor drainage. Check the soil moisture; if it’s soggy, reduce watering and improve drainage by adding compost or moving the tree to a raised bed.
  • Tree not growing. If your fig shows little growth after a few weeks, it may be getting too much shade or too little water. Ensure it gets full sun and consistent moisture. Also, check for pests like root-knot nematodes in warm climates.
  • Fruit not ripening. Figs need heat to ripen. In cool summers, you may need to pinch off the first crop (breba) to allow the main crop to develop. Also, ensure the tree is not over-fertilized with nitrogen, which promotes leaves over fruit.
  • Winter dieback. If the top of the tree dies back in cold climates, cut the dead wood back to live tissue in early spring. The tree will regrow from the roots, though you may lose a season of fruit.
  • Pest damage. Fig beetles, aphids, and spider mites can attack. Knock off pests with a strong spray of water or use insecticidal soap. For serious infestations, consult your local extension service.

Frequently Asked Questions

When is the best time to plant a fig tree?

Early spring, after the last frost, is ideal. Fall planting works in mild climates, but gives the tree less time to establish before winter.

How much space does a fig tree need?

Fig trees can spread 15-30 feet, so space them at least 10-20 feet apart. If you’re short on space, prune annually to keep them compact or grow in a container.

Can I plant a fig tree from a cutting?

Yes, fig cuttings root easily. Take a 6-8 inch cutting from a healthy branch in late winter, dip the end in rooting hormone, and plant in a pot of moist soil. Keep it warm and bright until roots form.

Do I need two fig trees to get fruit?

No, fig trees are self-pollinating. A single tree will produce fruit without a second tree.

How often should I water a newly planted fig tree?

Water deeply 2-3 times per week for the first month, then reduce to once a week. Adjust based on rainfall and soil type; the goal is to keep the soil consistently moist but not waterlogged.

Why are my fig tree’s leaves curling?

Curling leaves often indicate underwatering or heat stress. Check the soil moisture and increase watering if dry. It can also be a sign of aphid damage; inspect the underside of leaves.

Further reading: University of California Agriculture and Natural Resources. Details can change, so check the official page for anything that matters to you. Spotted a mistake? Tell us. How we write an answer.