Trendingat

02Home & Garden · Updated

How to Plant Grass in FS25: Step-by-Step Guide

Short answer

Use a seeder or planter after cultivating and liming the field

In Farming Simulator 25, grass is planted by cultivating the field, applying lime if needed, then using a seeder with grass seed. You’ll need the right equipment and a bit of patience for the grass to grow.

EquipmentSeeder or planter with grass capabilityExplained in: Step-by-Step
PrepCultivate and lime the field firstExplained in: Step-by-Step
GrowthTakes about 2-3 in-game daysExplained in: Step-by-Step
Reading time5 min7 sections, about 1,160 words

What You’ll Need

  • A tractor (any size works, but larger is faster)
  • A seeder or planter that supports grass (most seeders do; check the store description)
  • Grass seed (purchased from the shop, usually in big bags or pallets)
  • A cultivator or plow (if the field is not already cultivated)
  • A lime spreader (if soil pH is low)
  • A roller (optional but recommended for better yield)
  • A field you own or have leased

Step-by-Step

  1. Choose a field – Select a field you own or lease. Grass can be planted on any field, but it’s often used for grazing or silage, so pick a location that’s convenient for your farm.
  2. Prepare the soil – If the field has existing crops or weeds, you’ll need to clear it. Use a cultivator or plow to till the soil. This also removes stones and levels the ground. If the field is already cultivated (e.g., after harvesting), you can skip this step.
  3. Check soil pH – Open the soil composition menu (usually by pressing ‘P’ on PC or the corresponding button on console). If the pH is low (below 6.5), apply lime using a lime spreader. Lime raises pH and improves yield. Spread it evenly across the field.
  4. Refill the seeder – Purchase grass seed from the shop. You can buy it in bags or on pallets. Load the seed into your seeder by driving next to the seed source and pressing the refill button (usually ‘R’). Ensure the seeder is compatible with grass – most seeders list supported crops.
  5. Plant the grass – Drive the seeder over the field in straight lines. You can use GPS guidance (if available) or the in-game steering assist (Ctrl+H on PC) to keep rows even. Overlap slightly to avoid missed spots. The seeder will automatically sow the seeds as you drive.
  6. Roll the field (optional) – After sowing, you can use a roller to press the soil. This increases yield by up to 5% and also removes small stones. It’s not required but recommended for maximum output.
  7. Wait for growth – Grass takes about 2-3 in-game days to reach full maturity. You can speed up time by sleeping or using the time-lapse feature. You’ll see the grass sprout and turn a vibrant green.
  8. Harvest – Once fully grown, you can mow it with a mower, or use a forage harvester for silage. If you want to keep it as pasture, you can let animals graze on it.

Common Mistakes

  • Not cultivating first – Planting grass on a field that hasn’t been cultivated will result in poor growth or no growth at all. Always till the soil first.
  • Ignoring lime – Low soil pH reduces yield significantly. Check the soil composition and apply lime if needed. Skipping this step means less grass per acre.
  • Using the wrong seeder – Some seeders are only for specific crops like corn or sunflowers. Always check the store description to ensure the seeder supports grass.
  • Overlapping too much – While slight overlap is fine, excessive overlap wastes seed and time. Use steering assist to keep rows straight.
  • Harvesting too early – Grass that isn’t fully grown gives less yield. Wait until the grass is at its tallest and darkest green before mowing.

Tips

  • Use a direct seeder – If you have a direct seeder (one that doesn’t require prior cultivation), you can save time by skipping the cultivator step. However, you still need to lime if pH is low.
  • Consider grass for silage – Grass is a great source of silage for cows. If you have a forage harvester, you can turn grass into high-quality feed.
  • Rotate fields – If you plant grass on the same field repeatedly, the yield may drop. Rotate with other crops or let the field rest.
  • Use the in-game help – Press F1 (on PC) to see contextual help for the equipment you’re using. It shows the correct keys and settings.
  • Hire a worker – If you have the money, hire a worker to do the seeder work for you. They’ll drive perfectly straight lines, saving you time and effort.

Troubleshooting

  • Grass isn’t growing – Check if the field is cultivated and pH is adequate. Also, make sure you used the correct seeder and that the seed was actually loaded.
  • Seeder won’t refill – Make sure you’re near the seed source and that the seeder is empty or partially empty. Sometimes you need to open the refill menu manually (press ‘R’ or the corresponding button).
  • Grass grows unevenly – This usually happens if you missed spots or if the field had varying pH. Use a roller to even things out, and reapply lime if needed.
  • Yield is low – Check soil pH and consider rolling after planting. Also, ensure you’re harvesting at the right time – not too early, not too late.
  • Can’t find grass seed – Grass seed is often sold at the same place as other seeds. Look for a pallet or bag labeled “grass.” If you can’t find it, check the shop’s inventory – it might need to be ordered.

Frequently Asked Questions

What is the best seeder for grass in FS25?

Most seeders that list “grass” as a supported crop work well. Look for a seeder with a wide working width to cover more ground faster. The direct seeders are convenient because they skip cultivation.

Can I plant grass without a cultivator?

Yes, if you use a direct seeder that doesn’t require prior cultivation. However, you still need to lime if the soil pH is low. Otherwise, you must cultivate first.

How long does grass take to grow in FS25?

Grass takes about 2-3 in-game days to reach full maturity. You can speed up time by sleeping or using the time-lapse feature.

Do I need to roll the grass after planting?

Rolling is optional but recommended. It increases yield by about 5% and removes small stones. It’s a quick step that pays off in the long run.

Can I use grass for silage?

Yes, grass is a primary source of silage. Use a forage harvester to chop the grass, then store it in a silo or bunker to ferment.

What do I do if the soil pH is low?

Apply lime using a lime spreader. You can check the soil composition in the menu to see the current pH level. Lime takes a few in-game days to fully affect the soil, so apply it before planting.

Further reading: none, this is general know-how. Details can change, so check the official page for anything that matters to you. Spotted a mistake? Tell us. How we write an answer.