02Home & Garden · Updated
How to Read a Car Tire: Sidewall Numbers Explained
Short answer
Read the sidewall numbers to know size, type, load, speed, and age
The sidewall of every tire contains a series of letters and numbers that tell you its width, aspect ratio, construction, diameter, load index, speed rating, and manufacturing date. Once you know the code, you can verify fitment and check age.
What You’ll Need
- A tire on your vehicle or a spare
- Good lighting (flashlight if needed)
- Optional: owner’s manual for reference
Step-by-Step
- Find the sidewall markings. Look at the outer sidewall of the tire, near the rim. You’ll see a series of letters and numbers, often in a larger font than other markings. If the tire is mounted on a vehicle, you may need to turn the steering wheel to see the full code.
- Identify the tire type prefix. The code usually starts with a letter: P for passenger car, LT for light truck, T for temporary spare, or ST for special trailer. If there’s no letter, it’s a European metric tire. For example, in “P215/65R15 95H”, the “P” means passenger.
- Read the width. The next three numbers are the tire width in millimeters from sidewall to sidewall. In “P215/65R15”, the “215” means 215 mm wide.
- Check the aspect ratio. The two numbers after the slash are the sidewall height as a percentage of the width. “65” means the sidewall height is 65% of the width. So for a 215 mm tire, the sidewall is about 140 mm.
- Note the construction type. The letter after the aspect ratio indicates construction: R for radial, B for bias-ply, D for diagonal. “R” is standard for modern tires.
- Read the wheel diameter. The two numbers after the construction letter are the diameter of the wheel rim in inches. “15” means the tire fits a 15-inch wheel.
- Find the load index and speed rating. After the rim diameter, you’ll see a number and a letter, like “95H”. The number is the load index (how much weight the tire can carry at maximum pressure). The letter is the speed rating (the maximum speed the tire can sustain). For “95H”, 95 corresponds to 1,521 lbs, and H means up to 130 mph.
- Look for the DOT code. The U.S. Department of Transportation requires a DOT code on all tires sold in the U.S. It starts with “DOT” and is followed by a series of letters and numbers. The last four digits are the manufacturing date: the first two are the week, the last two are the year. For example, “DOT … 2319” means the 23rd week of 2019.
- Check for other markings. You may also see maximum load, maximum pressure (in psi), and sometimes a treadwear grade. These are useful but not essential for basic reading.
- Verify against the owner’s manual. Compare the tire size on the sidewall to the size listed in your vehicle’s owner’s manual or on the driver’s side door jamb sticker. They should match.
Common Mistakes
- Confusing the date code with other numbers. The date is always the last four digits of the DOT code, not the first or middle ones.
- Misreading the aspect ratio as a direct measurement. It’s a percentage, not millimeters.
- Ignoring the load index and speed rating. These are critical for safety and performance.
- Assuming all tires are the same size. Even if the tire fits the rim, the width and aspect ratio can affect handling and speedometer accuracy.
- Not checking the date on a used tire. Old tires may look fine but have degraded rubber.
Tips
- Take a photo of the sidewall code with your phone so you can reference it when buying new tires.
- If the tire has a temporary spare, the code may be different (e.g., T125/70D16). It’s meant for short-term use only.
- Check the tire pressure regularly, as the load index is only valid at the recommended pressure.
- If you have a four-wheel-drive vehicle, keep all tires the same size to avoid drivetrain damage.
- When replacing tires, match the size and speed rating at least as high as the original.
Troubleshooting
If you can’t find the DOT code, it might be on the inner sidewall. You may need to remove the wheel to see it. If the code is worn or unreadable, look for a sticker on the driver’s door jamb or in the glove box. If you’re unsure about the load index or speed rating, consult a tire professional or your vehicle’s manual. Never guess, as an incorrect tire can be dangerous.
Frequently Asked Questions
What does the “M+S” or “Mud and Snow” marking mean?
It indicates the tire is designed for mud and snow conditions, but it’s not a guarantee of winter performance. Look for the three-peak mountain snowflake symbol for true winter tires.
Can I use a tire with a higher speed rating than the original?
Yes, you can use a higher speed rating, but it may cost more and affect ride comfort. Never use a lower speed rating than the vehicle manufacturer recommends.
How do I know if a tire is too old?
Most tire manufacturers recommend replacing tires after 6-10 years, regardless of tread depth. Check the date code; if it’s older than 6 years, have a professional inspect it.
What does “LT” mean on a tire?
LT stands for Light Truck. These tires are designed for heavier vehicles like pickup trucks and SUVs, with a higher load capacity and often more durable construction.
Does the tire size affect fuel economy?
Yes, wider tires can increase rolling resistance, reducing fuel economy. Always stick to the manufacturer’s recommended size for best efficiency.
Can I mix tire brands on my vehicle?
It’s best to use the same brand and model on all four wheels, especially on all-wheel-drive vehicles. Mixing can cause uneven wear and handling issues.
Related
- Why We Celebrate Matariki: Meaning & Traditions
- Why We Celebrate Martin Luther King Day
- Why Do We Celebrate Mardi Gras? Origins & Traditions
Further reading: NHTSA. Details can change, so check the official page for anything that matters to you. Spotted a mistake? Tell us. How we write an answer.