02Home & Garden · Updated
How to Read a Metric Tire
Short answer
Read the sidewall numbers: width, aspect ratio, construction, rim diameter
A metric tire size like P215/65R15 tells you the tire's width in millimeters, the sidewall height as a percentage of width, the construction type, and the rim diameter in inches.
What You’ll Need
- A tire (on your vehicle or a spare)
- Good lighting to read the sidewall
- Optional: a flashlight or phone light
Step-by-Step
- Find the tire size on the sidewall. Look for a series of numbers and letters like P215/65R15. It’s usually on the outer sidewall, near the rim. If you can’t see it, check the inner sidewall or the driver’s door jamb sticker.
- Identify the first letter (optional). A letter before the numbers indicates the tire type. “P” means passenger car, “LT” means light truck, and “T” means temporary spare. If there’s no letter, it’s a metric tire (European style).
- Read the first number (width). The three-digit number after the letter is the tire’s section width in millimeters, measured from sidewall to sidewall at the widest point. For example, in P215/65R15, the width is 215 mm.
- Read the second number (aspect ratio). The number after the slash is the aspect ratio, which is the sidewall height as a percentage of the width. In P215/65R15, 65 means the sidewall height is 65% of 215 mm (about 140 mm).
- Read the construction letter. The letter after the aspect ratio indicates the internal construction. “R” stands for radial, which is standard on modern tires. “D” means diagonal (bias-ply), and “B” means belted. Most tires are radial.
- Read the last number (rim diameter). The last two-digit number is the diameter of the wheel rim in inches. In P215/65R15, the tire fits a 15-inch rim.
- Check the load index and speed rating (usually after the size). A number and letter like “91H” appear after the rim diameter. The number (91) is the load index, indicating how much weight the tire can carry at maximum pressure. The letter (H) is the speed rating, showing the maximum safe speed. For example, H is rated for up to 130 mph.
- Note any additional markings. Look for “M+S” (mud and snow), a mountain/snowflake symbol (for severe snow service), or “TUBELESS” (most are). These affect performance, not size.
Common Mistakes
- Confusing width with tread width. The width number is the tire’s overall width, not the tread surface. Tread is usually narrower.
- Mixing metric and imperial. Width is in millimeters, rim diameter in inches. Don’t try to convert them directly; they’re separate dimensions.
- Ignoring the aspect ratio. A 65 and a 55 series tire have very different sidewall heights, even if the width is the same. This affects handling and ride comfort.
- Assuming all tires with the same numbers are identical. The size is only part of the story; load index, speed rating, and tread pattern also matter.
- Reading the wrong side. The size is on the outer sidewall, but if the tire is mounted on the vehicle, you may need to look from the inside or check the door sticker.
Tips
- Always replace tires with the same size and speed rating as recommended in your owner’s manual.
- If you’re upgrading to larger rims, you’ll need a lower aspect ratio to keep the overall diameter similar. Use a tire size calculator to compare.
- Check the sidewall for the DOT code (Department of Transportation) to see the manufacturing date. It’s a four-digit number, e.g., 2319 means the 23rd week of 2019.
- Keep your tires inflated to the pressure listed on the driver’s door jamb, not the maximum pressure on the tire sidewall.
Troubleshooting
- Can’t find the size? It may be on the inner sidewall. If you can’t see it, check the driver’s door jamb or the owner’s manual.
- Numbers are worn off? Look for a sticker on the door jamb or glovebox. If not, a tire shop can measure your tire and tell you the size.
- Size looks unusual? Some tires have a “P” or “LT” prefix that changes the meaning. For example, LT tires have a different load range. Always match the type as well as the size.
- Confused by extra numbers? The load index and speed rating are separate from the size. If you’re replacing tires, match these too, or at least stay within the vehicle’s requirements.
Frequently Asked Questions
What does the “P” at the beginning mean?
It stands for “Passenger” tire, designed for cars and SUVs. “LT” means Light Truck, and “T” is for Temporary spare tires.
Can I use a tire with a different aspect ratio?
Only if you change the rim size accordingly to keep the overall diameter close. Changing the aspect ratio alone alters the tire’s height, which can affect speedometer accuracy and handling.
What is the load index?
It’s a numerical code that indicates the maximum weight a tire can carry when properly inflated. For example, 91 corresponds to 1,356 pounds.
What does the speed rating letter mean?
It’s the maximum speed the tire can safely sustain. For example, H = 130 mph, V = 149 mph, and Z = over 149 mph. Always use at least the rating recommended by the vehicle manufacturer.
Do I need to match the speed rating?
Yes, or use a higher one. A lower speed rating can be unsafe at highway speeds and may void warranty.
What is the difference between radial and bias-ply?
Radial tires have cords running perpendicular to the direction of travel, offering better grip and fuel efficiency. Bias-ply tires have cords at an angle, providing a stiffer sidewall but less comfort. Most modern vehicles use radial.
Related
- Why Is It Called Ken Burns Effect?
- How to Get Rid of Wasps Outdoors
- Why Do Cats Use a Litter Box? Instinct & Habits
Further reading: NHTSA. Details can change, so check the official page for anything that matters to you. Spotted a mistake? Tell us. How we write an answer.