Trendingat

02Home & Garden · Updated

How to Read a Tire Information: Sidewall & DOT Guide

Short answer

Read the sidewall numbers and letters that define size, type, load, speed, and date

Tire information is printed on the sidewall in a standardized format. The main markings are the tire size (like P215/65R15), load index, speed rating, and a DOT code that tells when the tire was made.

LocationSidewall of every tireExplained in: Step-by-Step
Main codeSize, load, speed, DOT dateExplained in: Step-by-Step
DOT dateLast 4 digits = week/yearExplained in: Step-by-Step
Reading time5 min7 sections, about 1,050 words

What You’ll Need

  • A tire (on or off the vehicle)
  • Good lighting (flashlight or sunlight)
  • A cloth to wipe dirt off the sidewall
  • Optional: phone camera to zoom in on small text

Step-by-Step

  1. Find the sidewall markings. Look on the outer side of the tire, between the rim and the tread. Most markings are raised or embossed. If you can’t see them, turn the steering wheel or move the car slightly to expose more of the sidewall.
  2. Identify the tire type prefix. The first letter(s) indicate the tire type: P for passenger car, LT for light truck, T for temporary spare, ST for special trailer, and no letter means European metric. For example, P215/65R15 is a passenger tire.
  3. Read the tire width. The three-digit number after the slash (e.g., 215) is the section width in millimeters, measured from sidewall to sidewall at the widest point. This is not the tread width.
  4. Check the aspect ratio. The two-digit number after the slash (e.g., 65) is the sidewall height as a percentage of the width. So 65 means the sidewall height is 65% of 215 mm. Lower numbers mean a shorter, wider look.
  5. Note the construction type. A letter after the aspect ratio indicates the internal structure: R for radial (most common), D for diagonal (bias ply), and B for belted bias. Radial is standard for modern vehicles.
  6. Read the wheel diameter. The two-digit number after the construction letter (e.g., 15) is the rim diameter in inches. This must match your wheel size.
  7. Find the load index and speed rating. After the wheel diameter, you’ll see a number and a letter, like 91V. The number (91) is the load index – a code that corresponds to a maximum weight the tire can carry. The letter (V) is the speed rating – the maximum speed the tire can handle. Look up these codes in a chart (see Tips).
  8. Look for additional service descriptions. Some tires have extra codes like XL (extra load), RF (run-flat), or M+S (mud and snow). These are optional but important for your vehicle’s needs.
  9. Decode the DOT code. Find the string of characters starting with “DOT”. The last four digits are the tire’s manufacture date: the first two are the week, the last two are the year. For example, DOT … 2319 means the 23rd week of 2019.
  10. Check for other markings. Look for the maximum load and pressure (in psi and kPa), the tire’s ply composition, and any safety warnings. These are usually in smaller text near the bead.

Common Mistakes

  • Confusing the tire size with the wheel size – the tire size includes the rim diameter, but the tire itself is not the wheel.
  • Misreading the aspect ratio as a direct measurement – it’s a percentage, not a fixed number.
  • Ignoring the speed rating – using a tire with a lower rating than your vehicle requires can be unsafe.
  • Misreading the DOT date – some people think the last four digits are a serial number, not a date.
  • Assuming all tires with the same size are identical – load index and speed rating vary.

Tips

  • Use a load index chart: you can find one online or in your owner’s manual. The chart lists the load index number and corresponding weight in pounds or kilograms.
  • Speed rating letters: Common ones are S (112 mph), T (118 mph), H (130 mph), V (149 mph), W (168 mph), Y (186 mph). Your vehicle’s recommended rating is in the owner’s manual or on the door jamb sticker.
  • Check the tire pressure when the tires are cold for accurate readings.
  • If you can’t read the DOT code due to wear, use a flashlight and look at an angle.
  • Take a photo of the sidewall with your phone and zoom in to read small text.

Troubleshooting

If you can’t find the markings, try cleaning the sidewall with a damp cloth – dirt and grime can obscure them. If the tire is mounted on the vehicle and you can’t see the inner side, the markings are usually on the outer side, but sometimes they’re on the inner side; you may need to remove the wheel or use a mirror. If the DOT code is worn off, check the other side of the tire, as it may be printed on both sides. If you’re still unsure, take the tire to a professional tire shop – they can identify it for you.

Frequently Asked Questions

What does the “P” in P215/65R15 mean?

P stands for P-metric, meaning the tire is designed for passenger vehicles. It indicates the tire’s size and load capacity are based on passenger car standards.

How do I know the age of my tire?

Look at the DOT code on the sidewall. The last four digits are the week and year of manufacture. For example, 2319 means the 23rd week of 2019.

What is the load index and why does it matter?

The load index is a number that corresponds to the maximum weight a tire can support when properly inflated. It’s crucial for safety – using a tire with a lower load index than required can cause tire failure.

What does the speed rating letter mean?

The speed rating indicates the maximum speed at which the tire can carry its rated load. For example, H is rated for up to 130 mph. Always match or exceed the vehicle manufacturer’s recommendation.

Can I use a tire with a different aspect ratio?

You can change the aspect ratio, but it affects the tire’s diameter and speedometer accuracy. It’s best to stick to the size recommended by the vehicle manufacturer or consult a professional.

What is the difference between radial and bias-ply tires?

Radial tires (R) have steel belts running across the tread, providing better grip and fuel efficiency. Bias-ply (D) tires have crisscrossed layers, making them stiffer and less common for modern cars.

Further reading: NHTSA. Details can change, so check the official page for anything that matters to you. Spotted a mistake? Tell us. How we write an answer.