02Home & Garden · Updated
How to Read a Tire Manufacture Date
Short answer
Look for the DOT code, then read the last four digits as week and year
The last four digits of the DOT code on your tire's sidewall tell you the week and year it was made. For example, 2319 means the 23rd week of 2019.
Your tire’s sidewall holds a secret code that tells you exactly when it was made. Knowing how to read this date helps you spot old tires, avoid buying stale inventory, and keep your vehicle safe. The date is part of the DOT code, which every tire sold in the U.S. must have.
What You’ll Need
- A flashlight (to see the sidewall clearly)
- Your vehicle’s owner’s manual (for recommended replacement age)
- Optional: a magnifying glass if the code is small or worn
Step-by-Step
- Find the DOT code. Look on the sidewall of the tire, near the rim. The DOT code starts with the letters “DOT” followed by a series of numbers and letters. It’s usually on the inner side of the tire, so you may need to crawl under the vehicle or turn the steering wheel to see it.
- Identify the last four digits. The code after “DOT” is a mix of letters and numbers. The last four characters are the date code. They will be numbers only, and they represent the week and year of manufacture.
- Decode the date. The first two of these four digits are the week of the year (01 to 52). The last two digits are the year. For example, 3218 means the 32nd week of 2018. If the last two digits are 00 to 99, they represent the year 2000 to 2099. So 1205 would be the 12th week of 2005.
- Know the pre-2000 rule. Tires made before 2000 have a three-digit date code. The first two digits are the week, and the third digit is the year (e.g., 229 means the 22nd week of 1989 or 1999). These tires are almost certainly too old to use safely, so treat them as expired.
- Check all tires. Each tire has its own DOT code. They may be manufactured in different weeks, which is normal. Check all four to know the age of each.
- Assess the age. Most tire manufacturers and safety experts recommend replacing tires that are six years old or older, regardless of tread depth. Some automakers suggest replacing at ten years. Check your owner’s manual for your vehicle’s specific recommendation.
Common Mistakes
- Reading the wrong numbers. The DOT code includes other numbers like the tire size and plant code. Only the last four digits are the date.
- Confusing week and year. Remember: first two digits are the week, last two are the year. 2319 is not 2019 week 23, it’s the 23rd week of 2019.
- Ignoring tires over six years old. Even if they look fine, rubber degrades over time. Heat, UV light, and ozone cause cracking and loss of strength.
- Thinking the date is on the tread. The DOT code is always on the sidewall, not the tread surface.
Tips
- Check the date before buying new tires. Ask the seller to show you the DOT code. Tires that have been in storage for a year or two are still fine, but you want a fresh set.
- Look for the code on both sides. If you can’t find it on one side, it’s likely on the other. Some tires have the DOT code on only one sidewall.
- Take a photo. Use your phone to snap a picture of the DOT code so you can zoom in and read it easily.
- Use the date for maintenance records. Note the date when you install new tires. That way you know when they hit the six-year mark.
Troubleshooting
If you can’t find the DOT code or it’s worn off, try these steps:
- Clean the sidewall. Dirt or tire dressing can obscure the code. Wipe with a damp cloth.
- Use a flashlight at an angle. Shining light across the sidewall can make the embossed letters stand out.
- Check the inner side. If the code isn’t on the outside, turn the steering wheel to see the inner sidewall, or jack up the vehicle if needed.
- If the code is unreadable, contact the tire manufacturer with the tire’s serial number (if you have it) or have a professional inspect the tire. A tire with a worn-off DOT code may be very old, so when in doubt, replace it.
Frequently Asked Questions
What does DOT stand for?
DOT stands for the U.S. Department of Transportation, which requires all tires sold in the U.S. to have this code for safety and recall purposes.
Can I drive on a tire that’s 10 years old?
Most experts say no. Even if the tread looks good, rubber degrades over time. Many automakers recommend replacing tires at 10 years, and some at 6. When in doubt, have a professional inspect them.
Do spare tires have a date code?
Yes, full-size spare tires have a DOT code. Donut spares may also have one, but they are meant for temporary use and should be replaced if they are old.
Is a tire safe if it’s only 2 years old but has cracks?
Cracks in the sidewall or tread are signs of dry rot, which can happen even in newer tires. If you see cracks, have the tire inspected by a professional; they may need replacement.
How can I tell if a tire is too old to use?
Check the date code. If the tire is more than 6 years old, it’s generally considered too old for safe use, regardless of tread depth. Also look for cracks, bulges, or excessive wear.
Do all tires have a DOT code?
In the U.S., yes. All tires sold for road use must have a DOT code. Some specialty tires (like those for trailers or off-road use) may also have it, but it’s required for passenger vehicle tires.
Related
- Nesting Meaning & How to Use It
- How Do Clouds Change? Process Explained
- How to Read a Tire DOT Number
Further reading: NHTSA. Details can change, so check the official page for anything that matters to you. Spotted a mistake? Tell us. How we write an answer.