Trendingat

02Home & Garden · Updated

How to Read Tire Size Numbers (P225/65R17)

Short answer

A tire size number tells you width, aspect ratio, construction, and wheel diameter

The string like P225/65R17 is a code: P means passenger tire, 225 is width in millimeters, 65 is the sidewall height as a percentage of width, R means radial, and 17 is the wheel diameter in inches.

FormatP225/65R17 95HExplained in: Step-by-Step
WidthMillimeters across treadExplained in: Step-by-Step
RatioSidewall % of widthExplained in: Step-by-Step
Reading time4 min7 sections, about 940 words

What You’ll Need

  • The tire itself (look at the sidewall)
  • Your vehicle’s owner’s manual or the sticker on the driver’s door jamb (to compare)
  • Optional: a tape measure if you want to verify dimensions

Step-by-Step

  1. Find the size string. It’s printed on the sidewall, usually in large letters like P225/65R17. It may start with a letter or not.
  2. Identify the leading letter (if any).
    • P = Passenger car (standard for cars, minivans, light SUVs)
    • LT = Light truck (for pickups, vans, heavy-duty use)
    • ST = Special trailer (for boat or utility trailers)
    • T = Temporary spare (donut)
    • No letter = European metric (similar to P but slightly different load capacity)
  3. Read the three-digit number (width). This is the tire’s section width in millimeters from sidewall to sidewall, measured at the widest point. For 225, it’s 225 mm (about 8.9 inches).
  4. Read the two-digit number after the slash (aspect ratio). This is the sidewall height as a percentage of the width. For 65, the sidewall is 65% of 225 mm = 146.25 mm. A lower number (like 40) means a shorter, sportier sidewall; a higher number (like 75) means a taller, more comfortable sidewall.
  5. Identify the construction letter.
    • R = Radial (almost all modern tires)
    • D = Diagonal or bias ply (older or specialty tires)
    • B = Belted bias (rare)
  6. Read the two-digit rim diameter. This is the wheel diameter in inches. For 17, it fits a 17-inch wheel. This is the most critical number for fitment.
  7. Check the load index and speed rating (after the size). You’ll see something like 95H. The number (95) is the load index – a code that corresponds to a specific weight capacity (you can look up the chart). The letter (H) is the speed rating – the maximum safe speed (H = 130 mph). These are important but not part of the basic size.
  8. Look for extra markings. You may see things like M+S (mud and snow), or a snowflake symbol (severe snow service), or XL (extra load). These are not part of the size but affect performance.

Common Mistakes

  • Ignoring the aspect ratio. A 225/60R17 and a 225/65R17 have the same width but different sidewall heights, so they are not interchangeable.
  • Confusing rim diameter with overall diameter. The 17 in 225/65R17 is the wheel size, not the tire’s total height.
  • Assuming P and no-letter are identical. They are similar but not always exactly the same in load capacity; always check the load index.
  • Forgetting the speed rating. A tire with a lower speed rating than your vehicle requires can be unsafe at highway speeds.

Tips

  • Always match the size on your door jamb sticker. It’s the size the manufacturer recommends for your vehicle.
  • When replacing tires, keep the same size and speed rating. Changing size can affect speedometer accuracy and handling.
  • If you’re considering a different size (e.g., for off-road or winter), consult a tire professional; there’s a lot of nuance.
  • Use the load index chart to know exactly how much weight each tire can carry. It’s not a simple number-to-pounds conversion; it’s a coded index.

Troubleshooting

If you can’t find the size string, it might be on the inner sidewall (tire mounted on the vehicle). If you still can’t find it, check your owner’s manual or the sticker on the driver’s door jamb. If the numbers are worn off, a tire shop can measure your tire and tell you the size. If you see a size that doesn’t match the door sticker, the previous owner may have changed the wheels; in that case, consult a tire professional to ensure the current size is safe.

Frequently Asked Questions

What does the “R” in tire size mean?

R stands for radial construction, meaning the internal ply cords are oriented at 90 degrees to the direction of travel. This is the standard for modern tires.

Can I change my tire size from the one on the door?

You can, but it’s not recommended without professional advice. Changing the aspect ratio or wheel diameter can affect speedometer accuracy, ride comfort, and clearance. If you do, keep the overall diameter within 3% of the original.

What does the load index number mean?

The load index is a code that corresponds to a specific weight capacity. For example, 95 means 1,521 pounds per tire. You can find a chart online or in tire literature. Always use tires with at least the load index recommended by the vehicle manufacturer.

What is the difference between P and LT tires?

P tires are for passenger vehicles and have a softer ride. LT tires are for light trucks and have heavier construction, higher load capacity, and higher inflation pressures. LT tires are often used on trucks and vans that carry heavy loads.

What does the speed rating letter mean?

The speed rating indicates the maximum speed at which the tire can carry its rated load. For example, H = 130 mph, V = 149 mph, and W = 168 mph. It’s important to use a tire with at least the speed rating your vehicle requires; check your owner’s manual.

What does “M+S” mean on a tire?

M+S stands for Mud and Snow. It’s a designation for all-season tires that have some capability in light snow. A three-peak mountain snowflake symbol indicates a more severe snow service rating.

Further reading: Tire Rack. Details can change, so check the official page for anything that matters to you. Spotted a mistake? Tell us. How we write an answer.