02Home & Garden · Updated
How to Read Tire Info: Sidewall Numbers Explained
Short answer
Tire info is found on the sidewall, with size, type, load, and speed ratings
Reading tire info means decoding the numbers and letters printed on the sidewall, which tell you the tire's size, type, load capacity, speed rating, and manufacturing date. This guide explains each part so you can choose the right tire and understand its limits.
What You’ll Need
- A tire (on your car or spare)
- Flashlight or good lighting (sidewalls can be dirty)
- Optional: a cloth to wipe off dirt
- Optional: a phone to note down the numbers
Step-by-Step
- Find the sidewall. The sidewall is the smooth outer face of the tire between the rim and the tread. All the info is printed there, usually in raised or recessed lettering.
- Look for the largest group of numbers and letters. This is the tire size, typically formatted like P215/65R15 95H. It’s the most prominent marking.
- Decode the first letter(s). The first letter indicates the tire type. Common ones: P for passenger vehicle, LT for light truck, T for temporary (spare), and ST for special trailer. If there’s no letter, it’s likely a European metric tire.
- Read the three-digit number after the slash. This is the tire width in millimeters, measured from sidewall to sidewall at the widest point. For example, 215 means 215 millimeters wide.
- Identify the aspect ratio. The two-digit number after the slash (like 65) is the aspect ratio: the sidewall height as a percentage of the width. So 65 means the sidewall height is 65% of 215 mm, which is about 140 mm.
- Note the construction type. The letter after the aspect ratio is usually R for radial, meaning the internal cords run radially across the tire. You might also see D for diagonal (bias-ply) or B for belted bias. Most modern tires are radial.
- Check the rim diameter. The two-digit number after the construction letter is the wheel rim diameter in inches. For example, 15 means the tire fits a 15-inch wheel.
- Look for the load index and speed rating. After the rim diameter, you’ll often see a number and a letter, like 95H. The number (95) is the load index, indicating the maximum weight the tire can carry at proper inflation. The letter (H) is the speed rating, showing the maximum safe speed. You can find charts online that map these to actual weights and speeds, but your vehicle’s owner’s manual or door sticker will list the correct ones.
- Find the DOT code. Look for the letters DOT followed by a series of characters. The last four digits are the week and year of manufacture. For example, 2319 means the 23rd week of 2019. Tires older than about 6 years should be inspected by a professional, even if tread looks fine.
- Note any additional markings. You may see things like M+S (mud and snow), a snowflake symbol (severe snow service), or max pressure/load ratings. These are useful but not essential for basic reading.
Common Mistakes
- Confusing width with sidewall height. The first number is width, not height. The height is derived from the aspect ratio.
- Ignoring the load index and speed rating. Using a tire with a lower load index than recommended can cause failure. Always match or exceed the vehicle’s requirements.
- Misreading the DOT date. Some people think the whole DOT code is the date. Only the last four digits matter.
- Assuming all tires with the same size are identical. Different brands and models can have different tread depths, materials, and performance characteristics even if the size matches.
- Forgetting to check the spare. Spare tires, especially temporary ones, have their own size and speed limits (often max 50 mph).
Tips
- Take a photo of the sidewall with your phone so you have the info handy when shopping.
- If the sidewall is dirty, wipe it with a damp cloth to read the numbers clearly.
- Always replace tires with the same size and type as recommended by the vehicle manufacturer. Check the sticker on the driver’s door jamb or the owner’s manual.
- When buying new tires, compare the load index and speed rating to the original equipment to ensure they meet or exceed requirements.
- Check tire pressure monthly, as underinflation can cause uneven wear and reduce fuel efficiency.
Troubleshooting
- Can’t find the size? It’s usually on the outer sidewall, but sometimes it’s on the inner side. If you can’t see it, the tire may be mounted with the whitewall or lettering inward. You may need to have the tire rotated or check the vehicle’s manual.
- Numbers are worn off. If the sidewall is worn or damaged, the numbers may be illegible. In that case, check the door sticker or owner’s manual for the correct size. If you’re unsure, consult a tire professional.
- DOT code is incomplete. Some tires have the DOT code on only one side. If you can’t find it, look on the other side of the tire.
- Confused by extra letters like ‘XL’ or ‘RF’. These indicate extra load (reinforced) or run-flat capability. They are important but not part of the basic size format.
Frequently Asked Questions
What does the ‘P’ in P215/65R15 mean?
It stands for ‘Passenger’ vehicle, indicating the tire is designed for cars, minivans, and light SUVs.
What is the difference between load index and load range?
Load index is a numerical code that corresponds to a specific weight capacity (e.g., 95 = 1,521 lbs). Load range (like ‘E’) indicates the ply rating and is more common on truck tires. Both are important but used differently.
How do I know the age of my tire?
Look for the DOT code on the sidewall. The last four digits indicate the week and year of manufacture (e.g., 2319 = 23rd week of 2019).
Can I use a tire with a higher speed rating than recommended?
Yes, you can use a higher speed rating, but it may result in a firmer ride and higher cost. However, never use a lower speed rating than the vehicle requires.
What does ‘M+S’ mean on a tire?
It stands for ‘Mud and Snow,’ indicating the tire is designed for moderate snow and mud conditions. However, it is not the same as a severe snow service rating (the mountain snowflake symbol).
Is the tire size the same as the rim size?
No, the rim size is just the diameter of the wheel (e.g., 15 inches). The tire size includes the width, aspect ratio, construction, and rim diameter.
Related
- How to Store Used Batteries Safely at Home
- How to Get Rid of Zucchini Bugs Fast
- Why Do Dogs Bark in Their Sleep? Causes Explained
Further reading: NHTSA. Details can change, so check the official page for anything that matters to you. Spotted a mistake? Tell us. How we write an answer.