Trendingat

02Home & Garden · Updated

How to Read Tire and Rim Size

Short answer

Read the sidewall numbers and the rim diameter in inches

Tire size is printed on the sidewall, like P215/65R15. The rim size is the last number (diameter in inches) and also stamped on the wheel. This guide breaks down every part.

LocationTire sidewallExplained in: Step-by-Step
FormatP215/65R15Explained in: Tips
Rim sizeLast number, inchesExplained in: Step-by-Step
Reading time6 min7 sections, about 1,480 words

What You’ll Need

  • Your vehicle (or just the tire/wheel if removed)
  • A flashlight if it’s dark
  • Optional: chalk or tape to mark measurements
  • Optional: a tape measure to verify rim width

Step-by-Step

  1. Find the tire size on the sidewall. Look for a series of numbers and letters like P215/65R15 95H. It’s usually on the outer sidewall, near the rim edge. If you can’t see it, check the inner sidewall (you may need to jack up the car or turn the steering wheel).
  2. Identify the tire type (first letter). The first letter indicates the type of tire. “P” means P-metric (for passenger vehicles), “LT” means Light Truck, “ST” is Special Trailer, and “T” is Temporary (spare). If there’s no letter, it’s a Euro-metric tire, which is similar to P-metric but has slightly different load ratings.
  3. Read the width (three-digit number). The next three digits (e.g., 215) represent the tire’s section width in millimeters, measured from the widest point of the outer sidewall to the widest point of the inner sidewall, when mounted on the correct rim. So 215 means the tire is 215 millimeters wide.
  4. Understand the aspect ratio (two-digit number). The number after the slash (e.g., 65) is the aspect ratio. It’s the sidewall height as a percentage of the width. For a 215/65, the sidewall height is 65% of 215 mm, which is about 140 mm. A lower number means a shorter sidewall (low-profile tire), which usually improves handling but gives a rougher ride.
  5. Decode the construction type (letter). The letter after the aspect ratio indicates the internal construction. “R” stands for Radial, which is the standard for modern tires. “D” means Diagonal (bias-ply), and “B” means Belted bias. You’ll almost always see “R”.
  6. Note the rim diameter (two-digit number). The number after the construction letter (e.g., 15) is the rim diameter in inches. This is the size of the wheel that the tire fits on. A 15 means it fits a 15-inch rim. This is the most important number when matching tires to wheels.
  7. Check the load index and speed rating (optional but important). After the rim diameter, you’ll see a number and a letter, like 95H. The number (95) is the load index, telling you how much weight the tire can carry at maximum inflation. The letter (H) is the speed rating, indicating the maximum speed the tire can sustain. For example, H is rated for 130 mph. You can find load index charts online, but the owner’s manual will tell you the required ratings for your vehicle.
  8. Look for extra markings. You may see additional numbers like “M+S” (mud and snow), a snowflake symbol (severe snow service), or a DOT code (Department of Transportation) which includes the manufacturing date. The DOT code ends with four digits: the first two are the week, the last two are the year (e.g., 2319 means the 23rd week of 2019).
  9. Measure the rim size (if needed). To confirm the rim size, you can measure the diameter from the bead seat (where the tire sits) across the center of the wheel. This is always in inches, even if the tire width is in millimeters. The rim width (e.g., 6.5J) is also stamped on the wheel, usually on one of the spokes or on the inner side near the valve stem.

Common Mistakes

  • Confusing rim diameter with overall wheel size. The rim diameter is just the wheel’s diameter, not the tire’s overall height. The tire’s overall diameter is the rim diameter plus twice the sidewall height.
  • Ignoring the load index and speed rating. Using a tire with a lower load index than required can cause tire failure. Always match or exceed the vehicle manufacturer’s ratings.
  • Assuming all 15-inch tires fit any 15-inch wheel. The rim width must be within the tire’s approved range. A tire that’s too narrow or too wide for the rim can cause poor handling and premature wear.
  • Misreading the aspect ratio. Some people think 65 means 65 millimeters, but it’s a percentage. Always calculate the sidewall height as a percentage of the width.
  • Forgetting the spare tire. Temporary spare tires (T) often have different sizes and speed ratings. They are only for temporary use and should not be driven at high speeds.

Tips

  • Write down your tire size. Keep a note of your tire size (e.g., P215/65R15) in your glove box. It’s useful when buying new tires or checking pressure.
  • Use the owner’s manual. The manual lists the recommended tire sizes and pressures for your vehicle. It also specifies the load index and speed rating required.
  • Check the door jamb sticker. Most vehicles have a sticker on the driver’s side door jamb that lists the original tire size and recommended inflation pressures. This is the most accurate reference for your car.
  • Understand plus sizing. If you want larger wheels, you can increase the rim diameter and reduce the aspect ratio to keep the overall diameter the same. For example, going from 15-inch to 17-inch rims would require a lower aspect ratio tire (e.g., 215/65R15 to 215/45R17). This is called “plus sizing” and must be done carefully to maintain speedometer accuracy.
  • When in doubt, ask a professional. If you’re not sure about compatibility, consult a tire shop or mechanic. They have access to fitment guides and can help you choose the right tire for your rim.

Troubleshooting

  • Can’t find the tire size on the sidewall? The size might be on the inner sidewall (the side facing the car). If you can’t see it, you may need to remove the wheel or use a mirror. Also, check the owner’s manual or the door jamb sticker.
  • The numbers are worn off. If the sidewall is faded or damaged, you can measure the tire manually. Measure the width (in millimeters) and the rim diameter (in inches). For the aspect ratio, measure the sidewall height from the rim to the tread and divide by the width, then multiply by 100.
  • You see a different size on the front and rear? Some vehicles (especially sports cars and performance models) use staggered fitment, meaning different tire sizes front and rear. This is normal if the rims are also different sizes. Check the door jamb sticker for the correct sizes for each axle.
  • The tire size doesn’t match the rim size. If you have a 16-inch tire on a 15-inch rim, it won’t seat properly and is dangerous. Never mount a tire on a rim that isn’t the correct diameter. If you suspect a mismatch, check the rim size stamped on the wheel and the tire size on the sidewall.
  • You need to know the rim width. The rim width is stamped on the wheel, often as “6.5Jx15” or similar. The “6.5” is the width in inches. If you can’t find it, measure the distance between the inside edges of the rim flanges (where the tire beads sit).

Frequently Asked Questions

What does the “P” in P215/65R15 mean?

The “P” stands for P-metric, meaning the tire is designed for passenger vehicles. It indicates the load and inflation standards used.

Can I put a wider tire on the same rim?

Yes, but only within a certain range. Each rim width has a recommended tire width range. For example, a 6.5-inch wide rim can typically fit tires from 185 to 215 mm wide. Check the tire manufacturer’s fitment chart.

What is the difference between rim size and wheel size?

They are often used interchangeably. Rim size refers to the diameter of the wheel’s rim (the outer edge where the tire mounts). Wheel size may also include the width and bolt pattern. In the tire size, the last number is the rim diameter.

How do I know the rim width?

Look for a stamp on the wheel, like “7Jx17” (7 inches wide, 17 inches diameter). You can also measure the distance between the inside edges of the rim flanges.

What does the speed rating mean?

The speed rating is a letter indicating the maximum speed the tire can safely sustain. For example, H is 130 mph, V is 149 mph, and Z is over 149 mph. Always use a tire with at least the speed rating recommended by the vehicle manufacturer.

Does tire size affect fuel economy?

Yes. Wider tires have more rolling resistance, which can reduce fuel economy. Also, changing the overall diameter can affect speedometer accuracy and engine RPM. Stick to the original size for best efficiency.

Further reading: Tire and Rim Association. Details can change, so check the official page for anything that matters to you. Spotted a mistake? Tell us. How we write an answer.