Trendingat

02Home & Garden · Updated

How to Remove Stains from White Shoes

Short answer

Use a paste of baking soda and hydrogen peroxide, scrub gently, and rinse

Mix equal parts baking soda and hydrogen peroxide into a thick paste, apply it to the stained areas, let it sit for 30 minutes, then scrub with a soft brush and rinse with cold water. Repeat if needed.

Main methodBaking soda + hydrogen peroxide pasteExplained in: Step-by-Step
Best forCanvas and mesh sneakersExplained in: Tips
Watch outAvoid bleach on colored trimExplained in: Common Mistakes
Reading time5 min7 sections, about 1,050 words

What You’ll Need

  • Baking soda
  • Hydrogen peroxide (3% solution)
  • White vinegar (for tough stains)
  • Dish soap (mild)
  • Soft-bristled brush (old toothbrush works)
  • Clean cloth or sponge
  • Cold water
  • Optional: laundry detergent, bleach (for all-white canvas only)

Step-by-Step

  1. Remove laces and insoles. Take out the laces and any removable insoles. This lets you clean the entire shoe and prevents damage to these parts.
  2. Brush off loose dirt. Use a dry brush or cloth to remove dust and mud from the surface. This prevents scratching the material when you scrub.
  3. Make a cleaning paste. In a small bowl, mix 1 tablespoon of baking soda with 1 tablespoon of hydrogen peroxide. Stir until it forms a thick, spreadable paste. If it’s too runny, add more baking soda; if too thick, add a drop of water.
  4. Apply the paste. Use your fingers or an old toothbrush to spread the paste evenly over the stained areas. Cover the entire white surface if the whole shoe is dirty.
  5. Let it sit. Leave the paste on for 30 minutes. For stubborn stains, you can let it sit for up to 2 hours, but don’t let it dry completely—if it dries, it can be harder to remove.
  6. Scrub gently. Dip the toothbrush in cold water and scrub the paste in circular motions. Focus on stained spots, but don’t press too hard—you could damage the fabric or leather.
  7. Rinse thoroughly. Rinse the shoes under cold running water until the water runs clear. Make sure no paste remains, as it can leave a white residue.
  8. Wash the laces and insoles. Hand-wash laces with a little dish soap and water, or toss them in a mesh bag in the washing machine. Insoles can be wiped with a damp cloth.
  9. Air dry completely. Stuff the shoes with paper towels or a clean cloth to help them hold their shape and absorb moisture. Let them air dry in a well-ventilated area, away from direct sunlight or heat. Do not use a dryer—it can warp or shrink the shoes.
  10. Repeat if necessary. If stains remain after drying, repeat the process. Some stains need two or three treatments.

Common Mistakes

  • Using bleach on colored parts. Bleach can discolor or fade colored accents, logos, or rubber soles. Stick to the baking soda paste for white areas only.
  • Scrubbing too hard. Aggressive scrubbing can fray fabric or scratch leather. Use gentle pressure and let the paste do the work.
  • Putting shoes in the dryer. Heat can shrink or warp shoes, and it may set stains. Always air dry.
  • Ignoring the laces. Dirty laces can make clean shoes look dirty. Wash them separately.
  • Using hot water. Hot water can set protein stains (like blood or sweat) and may damage glue. Use cold water for rinsing.

Tips

  • Test first. Try the paste on a small, hidden area to ensure it doesn’t damage the material.
  • For leather shoes. Use a gentle leather cleaner or a mix of mild soap and water instead of the baking soda paste, which can be abrasive. Wipe with a damp cloth and condition afterward.
  • For mesh shoes. Use a soft brush and gentle pressure to avoid tearing the mesh. You can also use a diluted solution of laundry detergent.
  • Remove scuffs on rubber soles. Rub a white eraser or a melamine sponge (like a magic eraser) over scuff marks.
  • Prevent future stains. Apply a water and stain repellent spray designed for shoes before wearing them.
  • Act quickly. The sooner you treat a stain, the easier it is to remove.

Troubleshooting

If the stain doesn’t come out after the first try, don’t panic. For oily stains, sprinkle cornstarch or baking soda on the spot and let it sit for a few hours to absorb the oil before cleaning. For grass stains, try a paste of equal parts baking soda and white vinegar. For yellowing on white canvas, soak the shoes in a solution of 1 part bleach to 4 parts water for no more than 15 minutes, then rinse thoroughly—only do this for all-white shoes. If the stain is still there after several attempts, it may be permanent, especially if it’s a dye or ink stain. In that case, consider covering it with a white fabric marker or shoe paint.

Frequently Asked Questions

Can I use toothpaste to clean white shoes?

Yes, white toothpaste (not gel) can work on small scuffs. Apply it with an old toothbrush, scrub gently, and wipe off with a damp cloth.

How do I get yellow stains out of white shoes?

Yellow stains are often from sweat or oxidation. The baking soda and hydrogen peroxide paste works well. For stubborn yellowing, soak the shoes in a mixture of cold water and a few tablespoons of baking soda for 30 minutes before scrubbing.

Can I put white shoes in the washing machine?

Yes, but it’s risky. Put them in a pillowcase or mesh bag, use cold water, and a gentle cycle with mild detergent. Air dry afterward. Machine washing can damage glue and shape, so hand cleaning is safer.

How do I remove ink stains from white shoes?

Dab the stain with rubbing alcohol using a cotton ball, then blot with a clean cloth. Repeat until the ink lifts, then rinse with cold water. Avoid rubbing, which spreads the ink.

Will baking soda damage my shoes?

Baking soda is mildly abrasive, so it can be too harsh for delicate materials like silk or suede. For canvas, leather, and mesh, it’s safe if you scrub gently. Always test on a small area first.

How do I keep white shoes from turning yellow?

Dry them away from direct sunlight and never use heat. Store them in a cool, dry place. Also, avoid leaving them in damp areas, which can cause mildew and yellowing.

Further reading: none, this is general know-how. Details can change, so check the official page for anything that matters to you. Spotted a mistake? Tell us. How we write an answer.