02Home & Garden · Updated
How to Unclog a Toilet: Step-by-Step Guide
Short answer
Use a plunger with a flange, then flush to clear the clog
The most reliable way to unclog a toilet is to use a flange plunger with a quick, forceful push-pull motion. If that fails, try a toilet auger or a homemade baking soda and vinegar mixture.
What You’ll Need
- Flange plunger (the one with a rubber flap inside the cup)
- Rubber gloves
- Bucket or old towels
- Toilet auger (drain snake) – optional but helpful for stubborn clogs
- Baking soda and white vinegar – for mild clogs
- Hot water (not boiling) – for certain methods
Step-by-Step
- Assess the water level. If the bowl is about to overflow, remove some water with a cup or small container into a bucket. If the water is low, you can add a little to help the plunger seal.
- Position the plunger. Place the flange plunger over the drain hole at the bottom of the bowl, making sure the rubber flange is pushed into the opening. The cup should be fully submerged in water.
- Plunge with firm, quick thrusts. Push down gently first to expel air, then pull up sharply. Repeat 10-20 times, maintaining a seal. The suction and pressure will dislodge the clog.
- Test the flush. After plunging, remove the plunger and press the flush handle. If the water drains normally and the bowl refills, you’re done. If not, repeat the plunging or move to the next step.
- Try a baking soda and vinegar mixture. If plunging doesn’t work, pour 1 cup of baking soda into the bowl, followed by 2 cups of white vinegar. Let it fizz for 10-15 minutes, then pour a pot of hot (not boiling) water from waist height into the bowl. Wait a few minutes and flush.
- Use a toilet auger. Insert the auger’s coiled cable into the drain until you feel resistance. Crank the handle to break up or hook the clog, then pull it out. Flush to test.
- Repeat as needed. Stubborn clogs may require multiple attempts. If nothing works, the clog may be in the main drain, and you’ll need professional help.
Common Mistakes
- Using a sink plunger. A flat-bottomed plunger won’t create a good seal in a toilet. Always use a flange plunger.
- Plunging with too much force. Overly aggressive plunging can splash water or damage the wax ring seal. Use controlled, even thrusts.
- Flushing repeatedly. If the toilet is clogged, flushing again will just overflow the bowl. Test with a single flush only after clearing.
- Pouring boiling water. Boiling water can crack the porcelain toilet. Use hot tap water, not boiling.
- Ignoring the problem. If the clog doesn’t clear after several attempts, it’s better to call a plumber than to risk damaging your plumbing.
Tips
- Keep a plunger nearby. Store a flange plunger in a caddy next to the toilet so it’s ready when needed.
- Use less toilet paper. Excessive toilet paper is the most common cause of clogs. Use only what you need.
- Never flush wipes. Even “flushable” wipes don’t break down like toilet paper and can cause major clogs.
- Clean the plunger after use. Rinse it in the toilet bowl and flush to clean, then disinfect with a bleach solution.
- Try dish soap. A squirt of dish soap can lubricate the pipe and help break down a clog. Let it sit for 15 minutes before plunging.
Troubleshooting
If the toilet still won’t unclog after multiple attempts, the issue may be a more serious blockage in the main sewer line. Signs include gurgling sounds from other drains, water backing up in the shower or sink, or the toilet overflowing when you flush other fixtures. In that case, stop using water in your home and call a plumber. Also, if you notice the toilet is rocking or leaking water at the base, the wax ring may be damaged, which also requires professional repair.
Frequently Asked Questions
Why does my toilet clog so often?
Frequent clogs are usually caused by flushing inappropriate items (like wipes or paper towels), using too much toilet paper, or a partial blockage in the drain pipe. Older low-flow toilets can also be more prone to clogs.
Can I use chemical drain cleaners?
Chemical cleaners are not recommended for toilets because they can damage the porcelain and the rubber parts of the flushing mechanism. They are also dangerous if they splash. Stick to mechanical methods like plunging.
What should I do if the toilet overflows?
Immediately shut off the water supply valve behind the toilet (turn it clockwise) to stop the flow. Then clean up the water, remove any excess from the bowl, and proceed with plunging.
How do I know if the clog is in the toilet or the main drain?
If plunging doesn’t work and other drains in your home are slow or backing up, the clog is likely in the main sewer line. If only the toilet is affected, the clog is probably in the toilet trap or the immediate drain pipe.
Is it safe to use a wire hanger to unclog?
No, a wire hanger can scratch the porcelain and damage the toilet’s trap. Use a proper toilet auger, which is designed to navigate the curves without causing damage.
Can I prevent clogs by flushing twice?
Flushing twice doesn’t prevent clogs; it just uses more water. The best prevention is to flush only human waste and toilet paper, and use a reasonable amount of toilet paper.
Related
- How Long to Bake Lasagna With No Boil Noodles
- How to Unclog Eustachian Tube at Home
- Kestrel Birds Diet: What They Eat Daily
Further reading: none, this is general know-how. Details can change, so check the official page for anything that matters to you. Spotted a mistake? Tell us. How we write an answer.