Trendingat

02Home & Garden · Updated

Nordic Ware Crepe Pan: What to Know

Short answer

A low-sided nonstick pan for making thin, even crepes

A Nordic Ware crepe pan is a shallow, nonstick skillet designed specifically for making crepes, with low sides that make it easy to flip and slide out the thin batter.

Best forcrepes, blintzes, and thin pancakesExplained in: How to Use a Nordic Ware Crepe Pan
Materialheavy-gauge aluminum with nonstick coatingExplained in: Choosing the Right Nordic Ware Crepe Pan
Reading time5 min9 sections, about 1,210 words

What Makes a Crepe Pan Different

A crepe pan looks like a small frying pan, but its defining trait is the very low side wall—usually about 1 to 1.5 inches high, versus 2 to 3 inches on a standard skillet. That low profile lets you slide a spatula under the crepe easily and flip it without the edge catching. The flat cooking surface is also perfectly level, so the thin batter spreads evenly without pooling in one spot. Nordic Ware’s version typically measures around 10 inches in diameter, which is a good size for home cooks: large enough to make a standard 10-inch crepe, yet small enough to handle easily.

How a Crepe Pan Works

The pan’s design works with the technique, not against it. You pour a small ladle of batter into the center, then tilt and swirl the pan so the batter coats the entire bottom in a thin, even layer. The low sides give you room to swirl without the batter sloshing over. The nonstick surface lets the crepe release cleanly when it’s ready to flip—usually after about 30 to 60 seconds on medium heat. Because the pan is made of heavy-gauge aluminum, it heats quickly and evenly, reducing hot spots that can brown one part of the crepe while leaving another pale.

Choosing the Right Nordic Ware Crepe Pan

Nordic Ware offers a few crepe pan options, and the main differences are size and handle design. Here’s what to consider:

  • Size: Most are 10 inches, which suits standard stovetops and recipes. A smaller 8-inch pan makes petite crepes but requires more batches.
  • Handle: Look for a long, heat-resistant handle that stays cool on the stovetop. Nordic Ware’s handles are typically riveted and comfortable to grip.
  • Nonstick coating: Choose a pan with a PFOA-free nonstick surface if that matters to you; Nordic Ware’s coating is designed for easy release.
  • Oven safety: Some models are oven-safe up to 350°F, which is handy if you want to keep crepes warm. Check the specific pan’s label, as not all are.

If you already own a good nonstick skillet with low sides, you might not need a dedicated crepe pan. But if you make crepes often, the specialized shape makes the process noticeably easier.

How to Use a Nordic Ware Crepe Pan

  1. Preheat the pan on medium heat for a few minutes. A properly heated pan ensures the batter sizzles slightly when it hits the surface, which helps it set quickly.
  2. Lightly grease the surface with a small amount of butter or oil, using a paper towel to spread it thinly. Too much fat makes the crepe greasy; too little makes it stick.
  3. Pour the batter into the center, using about 1/4 cup for a 10-inch pan. Immediately tilt and swirl the pan to coat the bottom evenly.
  4. Cook until the edges look dry and the bottom is lightly golden, about 30 to 60 seconds. The top should look set but still slightly moist.
  5. Flip with a thin spatula and cook the second side for 15 to 30 seconds. The second side is usually less browned and is the side you fill or fold.
  6. Slide the crepe onto a plate and repeat, stacking crepes with parchment paper between them to prevent sticking.

A common mistake is using too high heat, which browns the crepe before the inside is set. Medium heat is usually best. Another is pouring too much batter—you want just enough to coat the bottom thinly.

Common Problems and Fixes

  • Crepe sticks to the pan: The pan may not be hot enough, or the nonstick coating is scratched. Make sure the pan is preheated and use a little fat. If the coating is damaged, it’s time to replace the pan.
  • Crepe tears when flipping: You flipped too early. Wait until the edges are set and the top looks mostly dry. Use a thin, flexible spatula.
  • Crepe is too thick: You used too much batter. Use a smaller ladle and swirl quickly to spread it thin.
  • Uneven browning: The pan may not be level, or the heat is too high. Check that your stovetop burner is centered and adjust the heat down.

Cleaning and Care

To keep the nonstick coating in good shape, hand-wash the pan with warm, soapy water and a soft sponge. Avoid abrasive scrubbers and dishwasher detergent, which can degrade the coating over time. Dry it immediately to prevent water spots. Never use metal utensils on the surface—use silicone, wood, or plastic tools. Also, don’t heat the pan empty on high heat, as that can damage the nonstick layer. With proper care, a Nordic Ware crepe pan can last for years.

Alternatives to a Dedicated Crepe Pan

If you don’t want to buy a specialized pan, you can make crepes in a regular nonstick skillet with low sides (like an omelet pan) or even a well-seasoned cast-iron skillet. The key is to have a flat, smooth surface and low sides. A standard 10-inch skillet works, but the higher sides make it trickier to flip. An electric crepe maker is another option—it heats a flat round surface and often comes with a spreader, but it takes up counter space and is less versatile than a stovetop pan. For most home cooks, a dedicated crepe pan is a worthwhile investment if you make crepes more than a few times a year.

Frequently Asked Questions

Can I use a Nordic Ware crepe pan on an induction cooktop?

Some Nordic Ware crepe pans are induction-compatible, but not all. Check the product description or the bottom of the pan for an induction symbol. If it’s not marked, it likely won’t work on induction.

Is the nonstick coating safe?

Nordic Ware’s nonstick coating is PFOA-free, which means it doesn’t contain perfluorooctanoic acid, a chemical once used in nonstick coatings. As long as you don’t overheat the pan (above about 500°F), it’s considered safe for normal cooking.

Can I put the crepe pan in the oven?

It depends on the model. Some Nordic Ware crepe pans are oven-safe up to 350°F, but others are not. Always check the manufacturer’s instructions for your specific pan. If it’s not oven-safe, don’t put it in the oven.

What size crepe pan should I buy?

A 10-inch pan is the most common and versatile size for home use. It fits standard burners and makes a crepe that’s easy to fill and roll. If you only make small crepes or have a small stove, an 8-inch pan might be enough, but you’ll make more batches.

How do I season a nonstick crepe pan?

You don’t need to season a nonstick pan. Seasoning is for cast iron. For a nonstick pan, just wash it before first use and start cooking. If you want extra release, you can wipe a tiny bit of oil on the surface before the first crepe.

Further reading: none, this is general know-how. Details can change, so check the official page for anything that matters to you. Spotted a mistake? Tell us. How we write an answer.