Trendingat

02Home & Garden · Updated

PPS Charging System: How It Works and What You Need

Short answer

PPS charging is a smart fast-charging standard that adjusts voltage in tiny steps

PPS (Programmable Power Supply) is an extension of USB Power Delivery that lets a charger and phone negotiate precise voltage adjustments in 20mV increments, enabling faster, cooler, and safer charging.

Full nameProgrammable Power SupplyExplained in: Background: Why PPS Was Created
Part ofUSB Power Delivery 3.0Explained in: How PPS Charging Works
Reading time6 min9 sections, about 1,490 words

Background: Why PPS Was Created

Before PPS, fast charging was a mess. Every phone maker had its own proprietary standard—Qualcomm Quick Charge, OnePlus Warp Charge, Oppo VOOC—and they often didn’t work with each other. USB Power Delivery (USB PD) was a step toward unification, but it had a limitation: it could only offer fixed voltage levels like 5V, 9V, 15V, or 20V. That meant a phone had to accept one of those preset voltages, even if the ideal voltage for its battery was somewhere in between.

PPS solves this by allowing the charger and the phone to communicate continuously and adjust the voltage in very small steps (20 millivolts). This is similar to how a variable power supply works in a lab, but it’s built into the USB-C standard. The result is that the phone can request exactly the voltage it needs at any moment, which reduces heat and improves charging efficiency.

How PPS Charging Works

When you plug a PPS-compatible charger into a PPS-compatible phone, the two devices go through a handshake process. The charger advertises its PPS capabilities, including the voltage range it can provide (for example, 3.3V to 11V) and the maximum current. The phone then requests a specific voltage within that range, and the charger adjusts its output accordingly.

This dynamic adjustment happens continuously during charging. As the battery’s state of charge increases, the phone can request a lower voltage to reduce stress and heat. This is different from standard USB PD, where the voltage stays fixed until the phone steps down to a lower fixed level.

One of the key benefits of PPS is that it allows for higher power delivery without overheating. For example, Samsung’s 45W charging uses PPS to deliver 10V at 4.5A. The phone can request a voltage that keeps the power delivery efficient while managing heat. This is why PPS is often associated with “super fast charging” on Samsung Galaxy phones and is also used in Google Pixel phones.

Compatibility: What Devices Support PPS?

PPS is not universal. Both the charger and the device must support it. Here’s a breakdown:

  • Samsung Galaxy phones (from Galaxy S10 onwards) support PPS for their “Super Fast Charging” feature. They typically use 25W or 45W chargers.
  • Google Pixel phones (from Pixel 3 onwards) support PPS for fast charging, especially the Pixel 6 and later models that use USB PD PPS.
  • Many other Android phones from brands like OnePlus, Oppo, and Xiaomi also support PPS, but they may have their own proprietary fast charging that takes precedence.
  • iPhones do not use PPS. They use standard USB PD, which is fine, but they won’t benefit from PPS’s voltage stepping.
  • Laptops that support USB PD may also support PPS, but it’s less common. Most laptops use fixed voltage levels.

To know if your phone supports PPS, check the specs or look for the PPS logo on the charger. The charger should also list PPS in its output specifications, often as “PPS: 3.3-11V, 3A” or similar.

How to Choose a PPS Charger

When shopping for a PPS charger, consider the following:

  • Check your phone’s maximum charging speed. If your phone supports 45W PPS, a 25W charger will still work but will charge slower. Conversely, a 65W charger won’t hurt a 25W phone; it will just deliver what the phone requests.
  • Look for the PPS logo. The USB-IF (USB Implementers Forum) has a certification program, but not all chargers are certified. Still, a reputable brand will list PPS support.
  • Check the voltage range. Your phone’s PPS range should fall within the charger’s range. For example, Samsung phones use 3.3-11V, so a charger with that range is ideal.
  • Consider the number of ports. If you need to charge multiple devices, a multi-port charger with PPS on at least one port is convenient.

A common misconception is that any USB-C charger will fast-charge a PPS phone. That’s not true. If the charger doesn’t support PPS, the phone will fall back to standard USB PD or even slower charging. So if you want the fastest charging, you need a PPS charger.

Common Problems and Misconceptions

One issue people encounter is that their phone charges slowly even with a PPS charger. This can happen if the cable is not rated for the required power. PPS can deliver up to 5A, so you need a cable that supports at least that current. A cheap USB-C cable might only support 3A, which will limit charging speed.

Another misconception is that PPS is dangerous or will damage your battery. In fact, PPS is designed to be safer than fixed-voltage fast charging because it allows for more precise control. The phone’s charging IC (integrated circuit) constantly monitors battery temperature and voltage and adjusts the charger’s output accordingly. This reduces heat, which is the main factor in battery degradation.

Some users worry that using a PPS charger with a non-PPS device will cause problems. It won’t. The charger will simply fall back to standard USB PD or even 5V/2A if the device doesn’t support PD. It’s always safe to use a PPS charger with any USB-C device, as long as the charger is from a reputable brand and follows USB standards.

PPS vs. Other Fast Charging Standards

PPS is not the only fast charging standard, but it’s one of the most flexible. Here’s how it compares to others:

  • Qualcomm Quick Charge (QC): QC is proprietary and uses fixed voltage levels (5V, 9V, 12V, 20V). QC 4+ and QC 5 support PPS, but older versions do not. Many newer phones support both QC and PPS.
  • USB PD (non-PPS): Standard USB PD offers fixed voltage levels. It’s widely supported, but not as efficient as PPS for battery charging.
  • VOOC/Warp Charge (Oppo/OnePlus): These are proprietary standards that use a different approach—high current at low voltage. They are very fast but only work with specific chargers and cables.
  • Apple Fast Charging: Apple uses USB PD, not PPS. iPhones can fast-charge at 20W or 27W with a USB PD charger, but they don’t use PPS’s voltage stepping.

PPS is the most future-proof because it’s part of the USB standard, meaning it’s not tied to a single brand. As more devices adopt USB-C, PPS is likely to become more common.

Safety and Best Practices

PPS charging is safe when you use quality equipment. Here are some best practices:

  • Use a charger from a reputable brand that is certified (e.g., UL, CE, FCC).
  • Use a cable that is USB-IF certified and rated for the power level you need.
  • Avoid using your phone heavily while fast charging, as it can generate extra heat.
  • If your phone gets hot, unplug it and let it cool down.
  • Replace damaged cables or chargers immediately.

It’s also worth noting that PPS chargers are designed to work with a wide range of voltages, but they are not universal. Always check that the charger’s output range includes your phone’s required range.

Frequently Asked Questions

Is PPS the same as USB Power Delivery?

No. PPS is an extension of USB PD 3.0. Standard USB PD offers fixed voltage levels, while PPS allows for continuous adjustment in 20mV steps. All PPS chargers support USB PD, but not all USB PD chargers support PPS.

Will a PPS charger charge my iPhone faster?

No. iPhones do not support PPS. They use standard USB PD, so a PPS charger will charge an iPhone at the same speed as a regular USB PD charger. You won’t see any benefit from PPS.

Can I use a PPS charger with any USB-C device?

Yes, you can. The charger will communicate with the device and provide the appropriate power. If the device doesn’t support PPS, it will fall back to standard USB PD or even basic 5V charging. It’s safe.

Why is my PPS charger not fast charging my phone?

Check that your phone supports PPS and that the charger is PPS-compatible. Also, ensure you’re using a cable that supports the required current (at least 3A, ideally 5A). If everything is compatible, try a different port if your charger has multiple ports.

Does PPS damage my battery?

No. PPS is designed to reduce heat and stress on the battery by adjusting voltage precisely. In fact, it can be gentler on your battery than some fixed-voltage fast charging methods. However, all fast charging generates some heat, so it’s best to avoid charging in hot environments.

Further reading: USB Implementers Forum (USB-IF). Details can change, so check the official page for anything that matters to you. Spotted a mistake? Tell us. How we write an answer.