02Home & Garden · Updated
ISO vs AW Oil: Key Differences Explained
Short answer
ISO and AW oil differ in viscosity grade versus additive package
ISO (ISO VG) is a viscosity classification system, while AW (anti-wear) is an additive package. Most AW oils also carry an ISO VG number, so the two terms describe different properties of the same fluid.
Background: What ISO and AW Mean
ISO stands for the International Organization for Standardization, which publishes the ISO 3448 standard that defines viscosity grades for industrial liquid lubricants. An ISO VG number (like ISO VG 32 or ISO VG 46) simply indicates the oil’s kinematic viscosity at 40°C (104°F), measured in centistokes (cSt). The higher the number, the thicker the oil at that temperature.
AW stands for anti-wear, which refers to additives that form a protective layer on metal surfaces to reduce friction and wear under boundary lubrication conditions. These additives, typically zinc dialkyldithiophosphate (ZDDP) or ashless alternatives, activate when metal-to-metal contact is likely, such as during startup or under heavy loads.
The confusion arises because hydraulic oils are often labeled with both terms, like “ISO VG 46 AW.” That label tells you two things: the viscosity grade (46) and that it contains anti-wear additives.
How They Work: Viscosity vs. Additives
Viscosity is the oil’s resistance to flow. In a hydraulic system, the pump must move the oil through lines, valves, and actuators. If the oil is too thin, it leaks past seals and loses pressure; if too thick, it resists flow, causing sluggish operation and increased energy consumption. The ISO VG system standardizes this property so you can match the oil to the pump manufacturer’s recommendation.
Anti-wear additives work differently. They are chemical compounds that react with metal surfaces under high pressure and temperature, forming a sacrificial film that prevents direct metal-to-metal contact. This is especially important in vane and gear pumps, where the vanes or gears slide against the housing and can wear rapidly without protection.
An oil can have an ISO VG rating without AW additives (often called “R&O” or rust and oxidation inhibited oils), and it can have AW additives in any viscosity grade. However, most hydraulic oils sold today are both ISO VG and AW, because modern pumps typically require both proper viscosity and anti-wear protection.
How to Choose: Matching the Oil to the System
Choosing the right oil involves two steps: determining the required ISO VG and deciding whether AW additives are needed.
- Check the equipment manual – The manufacturer specifies the exact ISO VG and often the additive type (AW, R&O, etc.).
- Consider operating temperature – If the system runs hot, you may need a higher VG to maintain film thickness; if cold, a lower VG to avoid excessive resistance.
- Assess pump type – Vane and gear pumps generally require AW oils; piston pumps may be more tolerant but still benefit from AW.
- Check for compatibility – If the system previously used a non-AW oil, switching to AW is usually fine, but confirm with the manufacturer if the system has yellow metals (like bronze) that may be sensitive to certain additives.
In general, if the manual says “ISO VG 32” without specifying AW, you can use an AW oil of that viscosity, but it’s safest to follow the exact recommendation.
Common Problems and Misconceptions
One common misconception is that a higher ISO VG means better protection. Actually, using a thicker oil than specified can cause poor cold-start flow, increased heat generation, and higher energy use, while a thinner oil may lead to excessive wear and leaks. The right viscosity is the one the manufacturer designed for.
Another issue is assuming all AW oils are the same. The type and amount of anti-wear additive can vary, and some are more compatible with certain seal materials or metal alloys. Always use a reputable brand that meets the required specification (e.g., DIN 51524 or ASTM D6158) to ensure consistent quality.
Also, note that AW additives deplete over time. Regular oil analysis can detect when the additive package is exhausted, and the oil should be changed before wear becomes excessive. However, do not rely on color alone; oil can look dark but still be functional.
Cost and Availability
AW hydraulic oils are generally more expensive than non-AW R&O oils because of the additive cost. However, the price difference is modest compared to the cost of pump repairs or downtime. Availability is widespread; most industrial supply stores and online retailers stock AW oils in common ISO VG grades (32, 46, 68).
For small systems, buying a 5-gallon pail is typical, but for larger operations, bulk delivery may reduce per-gallon cost. Always store oils in a clean, dry place to prevent contamination.
Safety and Handling
Hydraulic oils are not highly hazardous, but they can cause skin irritation with prolonged contact, and used oil may contain harmful contaminants. Wear gloves and safety glasses when handling. Dispose of used oil properly – many auto parts stores and recycling centers accept it. Never pour oil down drains or onto the ground.
If oil is heated above its flash point (typically above 200°C), it can ignite, so keep away from open flames and hot surfaces. Also, avoid mixing different types of oil unless the manufacturer says it’s safe, as incompatible additives can precipitate or lose effectiveness.
Alternatives to AW Oils
For systems that don’t need anti-wear protection, R&O (rust and oxidation inhibited) oils are a cheaper alternative. They contain additives to prevent rust and oxidation but lack the anti-wear chemistry. These are suitable for low-pressure systems with plain bearings or where the pump is not susceptible to wear.
Another alternative is biodegradable hydraulic oil, often based on vegetable or synthetic esters. These are used in environmentally sensitive areas like forestry or marine equipment, but they may have different viscosity-temperature behavior and require special seals.
For extreme conditions, some systems use synthetic hydraulic oils (e.g., polyalphaolefin or ester-based) that offer better viscosity index and thermal stability. These are more expensive but can extend oil life and allow wider operating temperatures.
Frequently Asked Questions
Can I use ISO 46 oil instead of AW 46?
If the oil is labeled ISO 46 without AW, it may lack anti-wear additives. Using it in a system that requires AW could lead to premature pump wear. Check the manual; if it specifies AW, use an AW oil.
Is AW oil the same as hydraulic oil?
Not exactly. AW is a type of hydraulic oil, but there are also non-AW hydraulic oils (R&O) and other specialty types. Most hydraulic oils sold today are AW, but not all.
What does ISO VG 32 mean?
It means the oil has a kinematic viscosity of 32 centistokes at 40°C. It’s a standardized viscosity grade, not a quality rating.
Can I mix ISO 32 and ISO 46?
Mixing different viscosities will result in an intermediate viscosity, which may not be optimal. It’s best to avoid mixing unless it’s an emergency, and then change the oil soon.
Do all AW oils have the same additives?
No. The type and concentration of anti-wear additives can vary between brands and formulations. Some use ZDDP, others use ashless additives, and some are formulated for specific applications.
Related
- Why Do We Dream? Science & Common Theories
- What Does Vegemite Taste Like? Explained
- How to Grow Quinoa from Seed: Step-by-Step
Further reading: none, this is general know-how. Details can change, so check the official page for anything that matters to you. Spotted a mistake? Tell us. How we write an answer.