Trendingat

02Home & Garden · Updated

ISO vs SAE: Viscosity and Oil Ratings Explained

Short answer

ISO and SAE are different viscosity rating systems for industrial and engine oils

ISO ratings apply to industrial oils like hydraulic fluids, while SAE ratings apply to engine and gear oils. They measure the same property—viscosity—but at different temperatures and with different scales.

ISOIndustrial oils, 40°CExplained in: What ISO and SAE Mean
Main differenceTemperature and scaleExplained in: How SAE Viscosity Ratings Work
Reading time6 min9 sections, about 1,330 words

What ISO and SAE Mean

ISO stands for the International Organization for Standardization, a global body that publishes standards for everything from screw threads to oil viscosity. In the oil world, ISO refers specifically to ISO 3448, the standard that defines viscosity grades for industrial liquid lubricants.

SAE stands for the Society of Automotive Engineers, a U.S.-based organization that sets standards for vehicles and their components. The SAE viscosity rating system, defined in SAE J300, is what you see on engine oil bottles—like 5W-30 or 10W-40—and on gear oil containers, like 75W-90.

Both systems classify oils by their viscosity, which is a fluid’s resistance to flow. Thicker oils have higher viscosity; thinner oils flow more easily. But because engines and industrial machinery operate under very different conditions, the two systems use different measurement temperatures and different number scales.

How ISO Viscosity Grades Work

ISO 3448 assigns a single number to each grade, from ISO VG 2 up to ISO VG 3200. The number represents the oil’s kinematic viscosity in centistokes (cSt) at 40°C (104°F). For example, an ISO VG 46 oil has a viscosity of 46 cSt at 40°C, give or take a tolerance of about 10 percent.

These grades are used for industrial lubricants such as hydraulic fluids, gear oils for stationary equipment, compressor oils, and circulating oils. The 40°C temperature is a standard reference point that represents typical operating conditions for many industrial machines. A higher ISO number means a thicker oil.

Common ISO grades include 32, 46, 68, and 100. A machine’s manufacturer will specify the required ISO grade in the manual, often based on the operating temperature range and the type of pump or bearing.

How SAE Viscosity Ratings Work

The SAE J300 standard for engine oils uses a different approach. It has two parts: a winter grade (the number before the W) and a high-temperature grade (the number after the W). The W stands for winter, not weight. A 10W-30 oil has a winter rating of 10 and a high-temperature rating of 30.

The winter rating measures the oil’s flow at low temperatures, specifically its ability to be pumped and to crank the engine. The high-temperature rating measures viscosity at 100°C (212°F), which is close to a running engine’s oil temperature. The test methods include cold cranking simulator and kinematic viscosity at 100°C.

SAE also has separate ratings for gear oils, such as 75W-90 or 80W-140, defined in SAE J306. These use similar principles but different viscosity ranges and are for manual transmissions and differentials, not engines.

Unlike ISO, SAE ratings are not a direct measurement of viscosity in cSt. They are classification bands. For instance, an SAE 30 oil has a kinematic viscosity between 9.3 and 12.5 cSt at 100°C. The numbers are not directly comparable to ISO numbers.

How ISO and SAE Compare

The main difference is temperature. ISO measures at 40°C, while SAE measures at 100°C for the high-temperature grade. This means you cannot directly convert an ISO number to an SAE number or vice versa. An ISO VG 46 oil is roughly similar in viscosity to an SAE 20 oil at 40°C, but the comparison is not exact and depends on the oil’s viscosity index.

Viscosity index (VI) is a measure of how much an oil’s viscosity changes with temperature. A high VI oil thins out less when hot and thickens less when cold. Two oils with the same ISO grade can have different SAE equivalents if their VIs differ. For example, an ISO VG 32 oil with a high VI might behave like an SAE 10W-30, while one with a low VI might be closer to an SAE 20.

In practice, you rarely need to convert between ISO and SAE. Engine oils are always specified in SAE, and industrial oils are almost always specified in ISO. The confusion arises when someone uses an engine oil in a hydraulic system or wonders if a hydraulic oil can be used in an engine. The answer is usually no, because the additive packages and performance requirements differ, not just the viscosity.

Choosing the Right Oil

Always follow the equipment manufacturer’s recommendation. The manual or the nameplate on the machine will specify the exact ISO grade or SAE grade required. Using the wrong viscosity can lead to poor lubrication, increased wear, or leaks.

  • For engines: Use the SAE grade recommended in the owner’s manual, like 5W-30 or 10W-40.
  • For hydraulic systems: Use the ISO grade specified, like ISO VG 32 or 46.
  • For gearboxes: Check whether the manufacturer specifies SAE gear oil (like 75W-90) or ISO gear oil (like ISO VG 220).

If you are unsure, consult a professional lubricant supplier or the equipment manufacturer. Do not guess, because using the wrong oil can void warranties or cause damage.

Common Misconceptions

One common misconception is that SAE 30 and ISO VG 30 are the same. They are not. SAE 30 is a high-temperature grade for engines, while ISO VG 30 does not exist—ISO grades are 32, 46, 68, and so on. The numbers are different scales.

Another misconception is that higher viscosity always means better protection. In reality, using oil that is too thick can cause poor flow at cold starts, increased friction, and higher operating temperatures. Using oil that is too thin can lead to metal-to-metal contact. The right viscosity is the one the manufacturer designed the machine for.

Some people also think that multi-grade oils like 5W-30 are a blend of two different oils. Actually, they are single oils with viscosity modifiers that reduce the change in viscosity with temperature. The W rating is not a separate oil; it is a measure of cold-weather performance.

Safety and Handling

Used oil is a hazardous material. When changing oil, collect it in a leak-proof container and take it to a recycling center or auto parts store that accepts used oil. Do not pour it down drains, on the ground, or in the trash.

When handling oil, wear gloves and avoid prolonged skin contact. Some additives can be absorbed through the skin. If you get oil in your eyes, flush with water and seek medical attention if irritation persists.

Store oil in a cool, dry place away from heat sources and open flames. Oil is flammable, though not as volatile as gasoline. Keep it out of reach of children and pets.

Frequently Asked Questions

Can I use SAE 30 in a hydraulic system?

Only if the manufacturer specifies it. Many hydraulic systems require ISO VG 32 or 46, which are thinner than SAE 30. Using SAE 30 could cause poor performance and damage.

What is the difference between ISO VG 46 and SAE 20?

ISO VG 46 is a viscosity grade measured at 40°C, while SAE 20 is a high-temperature grade measured at 100°C. They are not directly comparable. An ISO VG 46 oil may have a similar viscosity to an SAE 20 at 40°C, but the SAE rating does not tell you the viscosity at 40°C.

Is higher ISO number better?

Not necessarily. Higher ISO numbers mean thicker oil. The best ISO grade is the one specified by the equipment manufacturer for the operating temperature and load conditions.

What does the W in 5W-30 mean?

The W stands for winter. It indicates the oil’s viscosity at low temperatures, specifically its ability to flow and be pumped in cold weather. The number before the W is the winter grade, and the number after is the high-temperature grade.

Can I mix ISO and SAE oils?

Mixing oils is not recommended because different additive packages can react and reduce performance. If you must top off, use the same type and grade as what is already in the system.

Further reading: none, this is general know-how. Details can change, so check the official page for anything that matters to you. Spotted a mistake? Tell us. How we write an answer.