Trendingat

02Home & Garden · Updated

Automatic Transmission with Clutch? How It Works

Short answer

Yes, most automatic transmissions contain one or more clutches

Traditional torque-converter automatics use clutches for gear changes, and automated manuals and dual-clutch transmissions rely on clutches to engage and disengage power.

Main roleConnect and disconnect engine powerExplained in: CVTs and Clutches
Common typesWet, dry, and multi-plateExplained in: Common Clutch Problems in Automatics
Also inCVTs and automated manualsExplained in: CVTs and Clutches
Reading time5 min8 sections, about 1,190 words

What a Clutch Does in an Automatic

In any car with a combustion engine, the clutch is the mechanical link between the engine and the transmission. It allows the engine to keep running while the wheels are stopped or while gears are changed. In a manual transmission, the driver operates the clutch with a pedal. In an automatic, the clutch is engaged and released automatically by the transmission’s hydraulic or electronic control system.

There are two broad families of automatic transmissions that use clutches:

  • Torque-converter automatics – the traditional “slushbox” found in most cars, trucks, and SUVs. They use a torque converter to connect the engine to the gearbox, but inside the gearbox they use clutch packs (multiple friction discs) to lock and unlock planetary gearsets.
  • Automated manual transmissions (AMTs) and dual-clutch transmissions (DCTs) – these are essentially manual gearboxes with computer-controlled clutches. A DCT has two separate clutches, one for odd gears and one for even gears, so the next gear is always pre-selected.

How a Torque Converter Automatic Uses Clutches

In a traditional automatic, the torque converter is a fluid coupling that transfers engine power to the transmission. It allows the engine to idle when the car is stopped, just like a manual clutch does when you press the pedal. Inside the transmission, however, there are multiple clutch packs. Each clutch pack consists of alternating friction discs and steel plates that are squeezed together by hydraulic pressure.

When the transmission needs to shift from first to second gear, it releases one clutch pack and engages another. The hydraulic control unit (valve body) directs pressurized transmission fluid to the appropriate clutch. The engagement is smooth because the fluid pressure is modulated, but the friction material still wears over time.

Most modern torque-converter automatics also have a torque converter clutch that locks the torque converter’s turbine to its impeller at highway speeds. This eliminates slip and improves fuel economy. This clutch is also automatic and is controlled by the transmission computer.

Dual-Clutch Transmissions (DCTs)

A dual-clutch transmission is a type of automated manual. It has two input shafts, each with its own clutch. One clutch handles the odd-numbered gears (1, 3, 5, 7) and the other handles the even-numbered gears (2, 4, 6). While you are driving in first gear, the transmission has already preselected second gear on the other shaft. When it’s time to shift, the first clutch releases and the second clutch engages almost simultaneously.

This pre-selection allows shifts to happen in a fraction of a second, faster than a human can shift a manual transmission. DCTs are common in performance cars and many economy cars because they combine efficiency with quick shifts. The clutches can be either dry (like a manual clutch) or wet (bathed in oil). Wet clutches handle more torque and cool better, while dry clutches are lighter and more efficient but may be less durable under heavy load.

CVTs and Clutches

Continuously variable transmissions (CVTs) use a belt and pulley system instead of gears. Many CVTs still use a clutch to engage the engine. Some use a torque converter for smooth launches, but others, especially in hybrid vehicles, use a single clutch pack to connect the engine to the CVT. In hybrids, a clutch may also disconnect the engine from the drive wheels when the car is running on electric power alone.

CVTs don’t have gear shifts, so they don’t need clutch packs for shifting, but they still need a way to connect and disconnect the engine. The clutch in a CVT is usually a wet multi-plate design that is engaged by hydraulic pressure.

Common Clutch Problems in Automatics

Automatic transmission clutches wear out over time, but the symptoms are different from a worn manual clutch. Common signs of clutch trouble in an automatic include:

  • Slipping – the engine revs but the car doesn’t accelerate proportionally.
  • Delayed engagement – a noticeable pause when shifting from Park to Drive or Reverse.
  • Harsh or jerky shifts – the transmission slams into gear instead of shifting smoothly.
  • Burning smell – overheated clutch material or transmission fluid.
  • Fluid contamination – dark or burnt-smelling transmission fluid indicates excessive clutch wear.

In a DCT, clutch wear is often felt as shuddering or vibration during low-speed acceleration, especially from a stop. This is because the computer is modulating the clutch engagement, and worn friction material makes it grab unevenly.

How to Extend Clutch Life in an Automatic

You can’t replace a clutch in an automatic the way you would in a manual, but you can take steps to make it last longer:

  1. Follow the service schedule – change the transmission fluid and filter at the intervals in your owner’s manual. Old fluid loses its friction-modifying additives and cooling ability.
  2. Don’t ride the brakes – when stopped, keep your foot on the brake rather than creeping forward with the accelerator. This reduces clutch slip in the torque converter and transmission.
  3. Avoid aggressive driving – hard acceleration and sudden shifts increase clutch wear.
  4. Don’t shift into Drive while reversing – come to a complete stop before changing gears to avoid shock loading the clutch packs.
  5. Let the car warm up – especially in cold weather, give the transmission a few minutes to reach operating temperature before driving hard.

Frequently Asked Questions

Do all automatic transmissions have a clutch?

Yes, every automatic transmission that connects to a combustion engine has some form of clutch, whether it’s a torque converter clutch, clutch packs inside the gearbox, or the launch clutch in a CVT. Even electric vehicles with a multi-speed transmission use a clutch, but most EVs have a single-speed gearbox and no clutch.

Is a dual-clutch transmission the same as an automatic?

A DCT is a type of automatic transmission, but it’s mechanically more like a manual. It has no torque converter and uses two clutches to shift gears automatically. Some DCTs have a manual shift mode, but the clutch is always computer-controlled.

Can you drive an automatic with a clutch pedal?

No, a traditional automatic has no clutch pedal. The clutch is operated by the transmission itself. Some automated manuals have a clutch pedal in certain commercial vehicles, but in passenger cars, the clutch is always automatic.

How long do automatic transmission clutches last?

With proper maintenance, clutch packs in a torque-converter automatic can last 150,000 miles or more. DCT clutches may wear sooner, especially in stop-and-go traffic, but many still last over 100,000 miles. It depends on driving habits and maintenance.

What is a wet clutch vs a dry clutch?

A wet clutch runs in a bath of transmission fluid, which cools and lubricates it. Wet clutches are common in DCTs and automatic transmissions because they handle more power and heat. A dry clutch operates without fluid, like a manual transmission clutch, and is lighter but less durable under high torque.

Further reading: none, this is general know-how. Details can change, so check the official page for anything that matters to you. Spotted a mistake? Tell us. How we write an answer.