Trendingat

02Home & Garden · Updated

Cold Snap Soft Serve Ice Cream Machine: How It Works

Short answer

A Cold Snap machine makes soft serve from liquid mix using liquid nitrogen

The Cold Snap is a countertop soft serve machine that uses liquid nitrogen to freeze a liquid ice cream mix instantly, creating a smooth, creamy texture without a traditional compressor.

No compressoror freezer neededExplained in: How It Works
Reading time6 min9 sections, about 1,390 words

What Is a Cold Snap Machine?

The Cold Snap is a brand of soft serve ice cream machine that freezes a pre-made liquid mix using liquid nitrogen. Unlike traditional soft serve machines that rely on a compressor and a freezing cylinder, the Cold Snap injects liquid nitrogen directly into the mix while it is being churned. The nitrogen rapidly absorbs heat, freezing the mix into a soft serve consistency in about 15 to 20 seconds. The result is a dessert with a very smooth, creamy texture and a slightly higher overrun (more air) than conventional soft serve, which makes it feel lighter.

How It Works

The machine is designed to be simple to operate. You pour a liquid ice cream mix into the hopper, then the machine dispenses a controlled amount of liquid nitrogen into the mix while a mixing blade rotates. The nitrogen evaporates quickly, and the cold gas chills the mix to around 20°F (-6°C) almost instantly. The key components are:

  • Hopper: holds the liquid mix, which is typically a shelf-stable or refrigerated product.
  • Liquid nitrogen line: connects to a separate nitrogen tank (not included with the machine).
  • Mixing chamber: where the nitrogen and mix combine.
  • Dispensing nozzle: where the finished soft serve comes out.

The machine does not have a freezer or a compressor. It relies entirely on the liquid nitrogen to freeze the product. This means it must be used with a supply of food-grade liquid nitrogen, which is stored in a separate cryogenic tank.

How to Use a Cold Snap Machine

Using a Cold Snap machine is straightforward, but it does require some specific steps to get good results:

  1. Prepare the mix: Chill the liquid mix to the recommended temperature (usually about 40°F) before pouring it into the hopper. Using a warmer mix will make the machine work harder and may result in a runny product.
  2. Connect the nitrogen: Attach the liquid nitrogen tank to the machine’s inlet line. Make sure the tank has a pressure regulator set to the level specified in the manual.
  3. Prime the machine: Run a small amount of mix through the system to ensure the lines are full and the mix flows evenly.
  4. Dispense: Press the dispense button. The machine will automatically mix the nitrogen and the mix, and soft serve will come out of the nozzle.
  5. Serve immediately: The soft serve is best served right away. It will melt faster than traditional soft serve because it has a higher air content and a slightly lower serving temperature.

A common mistake is using too much liquid nitrogen, which can make the mix too hard or cause the machine to spit. Follow the manufacturer’s settings for your specific mix.

Cold Snap vs. Traditional Soft Serve Machines

The main difference is the freezing method. Traditional machines use a compressor and a refrigeration system to freeze a mix that is held in a cylinder. They require a constant power supply, a longer startup time (often 30 minutes or more to cool down), and they need to be cleaned regularly to prevent bacterial growth. Cold Snap machines, by contrast, have no compressor and no freezing cylinder. They are smaller, lighter, and can be set up almost anywhere with access to a liquid nitrogen tank. However, they require a steady supply of liquid nitrogen, which is not as easy to store or handle as electricity.

Another difference is texture. Traditional soft serve is denser and has a lower overrun (usually 30-50%). Cold Snap soft serve has a higher overrun (sometimes up to 100%), which makes it fluffier and lighter. Some people prefer the denser texture of traditional soft serve, while others like the airy feel of Cold Snap.

Costs and Considerations

The Cold Snap machine itself is a significant investment, but the ongoing costs are mainly for the liquid nitrogen and the ice cream mix. Liquid nitrogen is sold by the liter and is relatively inexpensive per serving, but you need to factor in the rental or purchase of a cryogenic tank, delivery fees, and safety equipment. The ice cream mix is a specialty product that is often more expensive than traditional soft serve mix. You also need to consider the cost of electricity for the machine’s control panel and the mixer, though that is minimal.

When budgeting, remember that you will need to purchase a liquid nitrogen tank from a gas supplier, and you must have a well-ventilated area to use the machine. Liquid nitrogen evaporates quickly, and if the room is not ventilated, the nitrogen gas can displace oxygen and create a suffocation hazard.

Common Problems and Maintenance

Like any machine, the Cold Snap can have issues:

  • Clogged nozzle: If the mix is too thick or has lumps, the nozzle can clog. Clean it thoroughly after each use.
  • Inconsistent texture: This is often due to the mix temperature being too high or the nitrogen pressure being wrong. Check the mix temperature and the pressure gauge.
  • Machine spitting: This happens when there is too much nitrogen or the mix is too cold. Adjust the nitrogen flow.
  • Freezing up: If the machine is used for a long time, ice can build up on the mixing blade. Stop and let it thaw, then clean.

Maintenance is relatively simple: wipe down the exterior, disassemble the mixing chamber and nozzle, and wash with warm soapy water. The machine must be cleaned daily if used commercially, just like any soft serve machine. The liquid nitrogen line should be checked for leaks regularly.

Safety and Handling of Liquid Nitrogen

Liquid nitrogen is extremely cold, at -320°F (-196°C). It can cause severe frostbite on contact with skin, and the gas can displace oxygen in a confined space. When using a Cold Snap machine, follow these safety rules:

  • Always use food-grade liquid nitrogen.
  • Wear insulated gloves and safety goggles when handling the tank or connecting the line.
  • Ensure the area is well-ventilated. Do not use the machine in a small, enclosed room.
  • Never touch the liquid nitrogen or the nozzle immediately after dispensing, as it may be very cold.
  • Store the nitrogen tank upright and secured.
  • Do not allow the liquid nitrogen to come into contact with your skin or eyes.

If you are using the machine in a commercial setting, you must train staff on proper handling and have a safety data sheet (SDS) for liquid nitrogen on hand.

Frequently Asked Questions

Can I use any ice cream mix in a Cold Snap machine?

No. You should use a mix specifically formulated for liquid nitrogen freezing. These mixes have a lower freezing point and a higher fat and sugar content to prevent ice crystals from forming. Using a regular soft serve mix may result in a hard, icy product.

How long does the soft serve stay frozen?

It will stay at a soft serve consistency for about 5-10 minutes at room temperature. After that, it will start to melt faster than traditional soft serve because of its high air content. It is best to serve it immediately.

Do I need a license to use liquid nitrogen?

In most places, you do not need a special license to buy food-grade liquid nitrogen, but you must follow local safety regulations. Some areas require a permit for storing large quantities. Check with your local fire department or health department.

How much does a Cold Snap machine cost to run?

The main cost is the liquid nitrogen, which is typically rented in a tank. The mix is also more expensive than traditional soft serve mix. However, the machine uses very little electricity, so the overall running cost is mostly the consumables.

Can I use the Cold Snap machine at home?

Technically yes, but it is not practical for home use. You would need to source liquid nitrogen, which is not readily available to consumers, and you would need a safe, ventilated space. It is designed for commercial use.

Further reading: none, this is general know-how. Details can change, so check the official page for anything that matters to you. Spotted a mistake? Tell us. How we write an answer.