Trendingat

02Home & Garden · Updated

Luxury Vinyl Plank Chip Repair: DIY Steps

Short answer

Fix small chips with vinyl repair filler or a replacement plank

You can repair a small chip in luxury vinyl plank flooring using a color-matched vinyl repair filler or by replacing the damaged plank with a spare.

Repair time15–30 minutes for small chipsExplained in: Step-by-Step: How to Repair a Small Chip
Best forchips under 1/4 inch wideExplained in: Preventing Future Chips and Damage
Watch outdeep gouges may need plank replacementExplained in: When and How to Replace a Damaged Plank
Reading time6 min8 sections, about 1,340 words

What Causes Chips in Luxury Vinyl Plank Flooring?

Luxury vinyl plank (LVP) flooring is durable, but it is not indestructible. Chips typically happen when something heavy or sharp drops onto the floor. Common culprits include dropped cast-iron pans, heavy furniture legs, pet claws on worn areas, or grit and sand tracked in from outside that acts like sandpaper under foot traffic. A chip is a small piece of the wear layer or the vinyl core that has broken away, leaving a visible divot or crack. Unlike scratches that only affect the surface, a chip can expose the inner layers of the plank, making it more vulnerable to moisture and further damage if left untreated.

Assessing the Damage: Chip vs. Gouge vs. Crack

Before you decide on a repair method, look closely at the damaged area. The right approach depends on the size and depth of the damage, not just how it looks.

  • Surface chip – a small nick in the wear layer, usually less than 1/8 inch wide. This can often be filled with a vinyl repair compound.
  • Deep gouge – a chunk missing that goes through the wear layer into the vinyl core. Filler may work, but the repair will be visible.
  • Crack – a split in the plank that may extend to the edges. Cracks can allow moisture to seep under the plank and damage the subfloor, so replacement is often safer.
  • Edge chip – a chip on the tongue or groove edge. This can compromise the locking mechanism and may require replacing the plank.

If the chip is larger than a quarter-inch or if the plank is cracked all the way through, replacement is the more reliable fix. Filler on a large area will look patchy and may not hold up to foot traffic.

Tools and Materials You’ll Need

For a small chip repair, you do not need a full toolbox. Most of these items are available at hardware stores or online. If you have leftover planks from the original installation, keep them; they are the best match for color and texture.

  • Vinyl repair filler or a color-matched putty – these come in small tubes or pots and dry hard.
  • Putty knife or a plastic scraper – to spread the filler evenly.
  • Fine-grit sandpaper (220 grit) – for smoothing the dried filler.
  • Clean cloth and a mild cleaner – to remove dirt and wax from the damaged area.
  • Razor blade or utility knife – for trimming excess filler or cutting a replacement plank.
  • Heat gun or iron – only if you need to loosen adhesive for plank replacement.
  • Replacement planks – if you are doing a full plank swap.

If you do not have a spare plank, you can sometimes take one from a closet or under a refrigerator where it won’t be missed, but that is a bigger job and not always practical.

Step-by-Step: How to Repair a Small Chip

Follow these steps carefully. Work slowly, especially when applying filler, because it is easier to add more than to remove excess.

  1. Clean the area thoroughly – Wipe the chip with a mild cleaner and let it dry completely. Any dirt, wax, or grease will prevent the filler from adhering properly.
  2. Apply the filler – Using a putty knife, press the vinyl repair filler into the chip, overfilling slightly so it sits a little above the surface. Smooth it as best you can.
  3. Let it dry – Check the filler’s label for drying time; it typically takes 15–30 minutes, but some products need several hours. Do not walk on the area until it is fully cured.
  4. Sand it smooth – Once dry, use fine-grit sandpaper to level the filler with the surrounding floor. Sand gently in a circular motion, then wipe away the dust.
  5. Blend the color – If the filler is slightly off in color, you can use a vinyl floor marker or a tiny bit of acrylic paint to match the plank’s pattern. Seal with a clear vinyl floor finish if needed.

A common mistake is applying too much filler at once, which creates a lump that is hard to sand down without scratching the surrounding wear layer. Another is skipping the cleaning step – filler will peel off if the surface is oily.

When and How to Replace a Damaged Plank

If the chip is too large, or if the plank is cracked or lifted at the edges, replacement is the better option. This is more involved but still doable for a DIYer, especially with floating floors (where planks click together without glue).

For a floating floor, you can often disassemble the floor from the nearest wall until you reach the damaged plank, then click in a new one. That is time-consuming. A faster method is to cut out the damaged plank:

  1. Score and cut the plank – Use a utility knife to cut a grid pattern into the damaged plank, then pry out the pieces with a chisel.
  2. Clean the subfloor – Remove any adhesive or debris so the new plank sits flat.
  3. Cut the new plank – Trim the replacement plank so it fits the opening, removing the tongue on the side that will slide under the adjacent plank.
  4. Glue it down – Apply flooring adhesive to the subfloor and press the new plank into place. Use weights on top until the adhesive dries.

This method works best if you have a spare plank that matches. If you do not, you may need to contact the manufacturer or a flooring store to order a matching piece, but color lots can vary, so it may not match perfectly.

Preventing Future Chips and Damage

Prevention is easier than repair. Most chips come from avoidable causes, and a few simple habits can keep your LVP looking new for years.

  • Place felt pads under furniture legs and use coasters under heavy objects.
  • Put doormats at entrances to catch grit and sand that can scratch the wear layer.
  • Keep pet nails trimmed to reduce scratching and chipping.
  • Avoid dragging sharp or heavy items across the floor; lift instead.
  • Use a soft-bristle broom or vacuum with a floor-brush attachment to remove debris that can act like sandpaper.

Also, avoid using steam mops or excessive water on LVP, as moisture can weaken the seams and make the planks more prone to damage.

Frequently Asked Questions

Can I use wood filler on luxury vinyl plank?

Wood filler is not ideal because it dries hard and does not flex with the vinyl, so it may crack or pop out. Use a vinyl-specific repair filler or a flexible acrylic filler instead.

Will a repair be visible?

Small chips that are filled and color-matched can be nearly invisible. Larger repairs will always be noticeable up close, but a good color match and careful smoothing can make them blend well.

How do I match the color of the filler to my floor?

Most vinyl repair fillers come in a few basic colors like tan, gray, and brown. You can mix two colors to get a closer match, or use a vinyl floor marker to add grain lines after the filler dries.

Is it cheaper to repair or replace a chipped plank?

Repairing a small chip costs only a few dollars for filler and takes minutes. Replacing a plank requires a spare plank and more labor, but it is the only option for large damage or cracks.

Can I fix a chip in a glued-down LVP floor the same way?

Yes, the filling method works the same for glued-down floors. Replacing a plank is harder because you have to cut the plank out and scrape up the old adhesive, but the process is similar.

Further reading: none, this is general know-how. Details can change, so check the official page for anything that matters to you. Spotted a mistake? Tell us. How we write an answer.