02Home & Garden · Updated
How to Read Tire Size on a Tire
Short answer
Tire size is a series of letters and numbers on the sidewall that specify dimensions and type
Look for a string like P215/65R15 95H printed on the tire sidewall. The letters and numbers tell you the tire type, width, aspect ratio, construction, rim diameter, load index, and speed rating.
What You’ll Need
- A tire (on or off the vehicle)
- A flashlight if the tire is dirty or in low light
- A cloth or brush to clean the sidewall if needed
- Optional: a magnifying glass for small text
Step-by-Step
- Find the sidewall. The sidewall is the flat area between the rim and the tread. Look for the largest string of numbers and letters, usually starting with a letter like P, LT, or ST.
- Identify the tire type (first letter). The first letter indicates the intended use:
- P – Passenger vehicle (cars, minivans, light trucks)
- LT – Light truck (pickups, vans, SUVs)
- ST – Special trailer (for trailers only)
- T – Temporary spare (compact spare tire)
- No letter means European metric, often used on sports cars
- Read the three-digit width. The next three numbers (e.g., 215) are the tire width in millimeters from sidewall to sidewall at the widest point.
- Find the aspect ratio (two digits after the slash). This number (e.g., 65) is the height of the sidewall as a percentage of the width. A 65 means the sidewall height is 65% of 215 mm, about 140 mm.
- Note the construction letter. Usually an R for radial (most common), but you may see D for diagonal (bias ply) or B for belted bias.
- Read the rim diameter. The two-digit number after the construction letter (e.g., 15) is the diameter of the wheel rim in inches. This must match your wheel size.
- Check the load index and speed rating. After the rim diameter, you’ll see a number and a letter (e.g., 95H). The number (95) is the load index – the maximum weight the tire can carry at proper inflation. The letter (H) is the speed rating – the maximum speed the tire can sustain. You can find charts online or in the owner’s manual to decode these.
- Look for additional markings. You may also see a load range (e.g., SL for standard load, XL for extra load), a DOT code (for manufacturing date), and the tire’s maximum inflation pressure. These are useful but not part of the basic size.
Common Mistakes
- Confusing tire width with tread width. The width is the overall sidewall-to-sidewall measurement, not the tread contact patch.
- Mixing metric and imperial. Width is in millimeters, rim diameter is in inches. Don’t mix them up.
- Ignoring the load index and speed rating. These matter for safety and performance, not just the physical dimensions.
- Assuming all tires with the same numbers are identical. The size is standardized, but tread design, compound, and other features vary by brand and model.
- Reading the DOT code as the size. The DOT code is a separate string that includes the manufacturing date, not the size.
Tips
- If the sidewall is dirty, wipe it with a damp cloth to read the numbers clearly.
- Take a photo with your phone to zoom in on the small text.
- The tire size is also listed on the driver’s side door jamb sticker and in the owner’s manual.
- When replacing tires, always match the size and load/speed ratings recommended by the vehicle manufacturer.
- If you have a spare tire, check its size too—it may be different (e.g., T125/70D16).
Troubleshooting
- Can’t find the size on the sidewall? It’s usually on the outer side facing away from the vehicle. If not, check the inner side or the driver’s door jamb sticker.
- Numbers are worn off? Check the door jamb sticker, the glovebox, or the owner’s manual. These list the original tire size.
- Confused by additional letters like “ZR”? ZR indicates a speed rating above 149 mph (240 km/h). It’s still a radial tire, but the Z is part of the speed rating.
- Not sure what load index or speed rating you need? Refer to the vehicle’s placard (door jamb) or the owner’s manual. Never guess—using a lower load index than required is dangerous.
- What if the size is in a different format? Some tires, especially older or European ones, may not have the leading P or LT. The numbers still follow the same logic.
Frequently Asked Questions
What does the “P” mean in P215/65R15?
The “P” stands for Passenger vehicle, meaning the tire is designed for cars, minivans, and light trucks. It’s a common designation for tires sold in the US.
Can I use a tire with a different aspect ratio?
You can, but it will change the overall diameter and speedometer reading. For example, a 60 instead of 65 will make the tire slightly shorter. Always consult a tire professional or the owner’s manual before changing sizes.
What is the load index and speed rating?
The load index (the number) tells you the maximum weight the tire can carry at its rated inflation pressure. The speed rating (the letter) tells you the maximum speed the tire can sustain. Both are critical for safety.
How do I find the manufacturing date of my tire?
Look for the DOT code on the sidewall. The last four digits are the week and year of manufacture. For example, 2319 means the 23rd week of 2019.
Why is the rim diameter in inches while the width is in millimeters?
It’s a historical quirk. Tire width is measured in millimeters, but wheel diameter is measured in inches, a standard that has persisted in the industry. Just remember that the two units are different.
What does “XL” or “SL” mean?
XL stands for Extra Load (also called reinforced), meaning the tire can carry more weight at higher inflation pressure. SL stands for Standard Load. Look for these letters near the size or in the load range.
Related
- Why Do Dogs Attack Other Dogs? Causes Explained
- How to Read a Tire DOT Code
- Why Is the Sky Yellow in Brookline? Causes Explained
Further reading: U.S. Department of Transportation (NHTSA). Details can change, so check the official page for anything that matters to you. Spotted a mistake? Tell us. How we write an answer.