02Home & Garden · Updated
How to Read a Tire DOT Code
Short answer
A tire DOT code tells you the plant, size, and week and year it was made
The DOT code is a string of letters and numbers molded into the tire sidewall. The last four digits are the most important: they tell you the week and year the tire was manufactured.
What You’ll Need
- A flashlight or good lighting (the code is often recessed)
- A clean cloth to wipe the sidewall if dirty
- A magnifying glass or phone camera to zoom in (helpful for small print)
Step-by-Step
- Find the DOT code. Look on the sidewall of the tire, near the rim (the metal edge). It’s a series of characters starting with the letters “DOT.” It may be on the inner or outer side of the tire, so check both sides of the car if you can’t see it. The code is usually in a rectangular recessed area.
- Identify the plant code. After “DOT,” the next two characters are letters or numbers that identify the manufacturing plant. For example, “DOT XX” means the plant code is “XX.” This is useful if you ever need to file a recall claim, but for general age checks, you can skip it.
- Read the tire size code. The next two characters (or sometimes four) represent the tire size and type. This is a code that the manufacturer uses internally; it doesn’t directly give you the standard tire size (like P215/65R15). You don’t need to decode this for age or safety—it’s mostly for the factory.
- Look for the final four digits. The last four numbers before the end of the DOT sequence are the date of manufacture. The first two digits are the week of the year (01 to 52), and the last two are the year. For example, “2319” means the 23rd week of 2019. If you see only three digits, the tire was made before 2000; the single digit is the year (e.g., “239” means the 23rd week of 1999 or 1989—you can tell by the tire’s other markings).
- Check for a triangle or other marker. Some tires have a small triangle or a raised dot on the sidewall. This is not part of the DOT code; it indicates the location of the tire’s inner joint or the lightest point for mounting. Ignore it for date purposes.
- Record the date. Write down the week and year. This tells you the tire’s age. For example, if the last four digits are “4520,” the tire was made in the 45th week of 2020 (early November).
Common Mistakes
- Reading the wrong set of numbers. The DOT code is only the sequence that starts with “DOT.” Other numbers on the sidewall (like the tire size, load index, or speed rating) can be confusing. Look specifically for the “DOT” prefix.
- Misreading the week and year. The last four digits are always week then year, not the other way around. “2319” is the 23rd week of 2019, not the 19th week of 2023.
- Assuming the date is the purchase date. The DOT code gives the manufacturing date, not when the tire was installed. A tire could sit in a warehouse for months before being sold.
- Forgetting to check all four tires. Tires are often replaced individually, so each tire may have a different DOT date. Always check the date on every tire.
Tips
- If the sidewall is dirty, wipe it with a damp cloth. The code is often recessed and can fill with dirt.
- Use your phone camera to take a close-up photo. Then zoom in on the photo to read the small characters.
- If you can’t find the DOT code on the outside of the tire, check the inside—you may need to turn the steering wheel to see the inner sidewall.
- For tires made before 2000, the date is only three digits. If you see a three-digit code, the tire is over 20 years old and should be replaced regardless of tread depth.
- Note that the DOT code is on only one side of the tire. If you see a code that doesn’t start with “DOT,” it’s not the DOT code.
Troubleshooting
If you cannot find the DOT code at all, it may be on the inner sidewall, which is only visible when the tire is off the vehicle or when you turn the steering wheel fully to one side. If the code is worn off or illegible, check the other side of the tire—sometimes the code is only on one side. If you still can’t read it, look for a sticker on the driver’s door jamb that lists the original tire size, but that won’t give you the date. If the code is partially worn, try rubbing chalk or a pencil over the recessed area to make the characters stand out. If you suspect the tire is very old but can’t read the date, a tire professional can often help identify the age from other markings.
Frequently Asked Questions
What does DOT stand for?
DOT stands for the U.S. Department of Transportation, which requires this code on all tires sold in the United States.
Do all tires have a DOT code?
Yes, all tires intended for use on U.S. roads must have a DOT code. It’s a legal requirement.
Is the DOT code the same as the tire size?
No. The DOT code includes a plant code and a size code, but it doesn’t directly tell you the standard tire size (like P215/65R15). That information is elsewhere on the sidewall.
How old is too old for a tire?
Most tire manufacturers recommend replacing tires after 6 to 10 years, regardless of tread depth. Check with your tire’s manufacturer for specific guidance, but if the DOT code shows the tire is over 10 years old, it’s wise to have it inspected.
Can I read the DOT code without taking the tire off?
Yes, usually. The code is on the sidewall and is visible from outside the car, though you may need to turn the steering wheel to see it on the inner side.
What if the last four digits are not numbers?
If the last four characters include letters, you’re not looking at the date. The date is always four numbers (or three for pre-2000 tires). Look for a separate set of numbers at the end of the DOT sequence.
Related
- How to Plant Glow Berries in Minecraft
- How Do Bees Breathe? Spiracles & Air Sacs
- Passport Book Upgrade: How to Get One with a Card
Further reading: NHTSA. Details can change, so check the official page for anything that matters to you. Spotted a mistake? Tell us. How we write an answer.