02Home & Garden · Updated
ZF5 Transmission Clutch Kit: What to Know
Short answer
A ZF5 clutch kit includes the clutch disc, pressure plate, and release bearing for the ZF S5-42 or S5-47 manual transmission
A ZF5 clutch kit is the replacement clutch assembly for the ZF S5-42 and S5-47 5-speed manual transmissions used in Ford trucks and other vehicles. It typically includes the clutch disc, pressure plate, and pilot or release bearing, and sometimes a flywheel or alignment tool.
What the ZF5 Transmission Is
The ZF5 refers to a family of 5-speed manual transmissions made by ZF Friedrichshafen AG, commonly installed in Ford F-Series trucks (F-250, F-350) and vans from the late 1980s through the 1990s. The two main models are the S5-42 and the S5-47, which differ in torque rating and some internal parts. These gearboxes are known for their strength and durability, often lasting several hundred thousand miles when maintained. The clutch is the wear item that connects the engine to the transmission, and it will eventually need replacement.
What a Clutch Kit Includes
A complete ZF5 clutch kit usually contains the parts that wear out together, so you replace them all at once. A typical kit includes:
- Clutch disc – the friction plate that engages the flywheel and pressure plate
- Pressure plate – the spring-loaded plate that presses the disc against the flywheel
- Release bearing (throwout bearing) – the bearing that disengages the clutch when you push the pedal
- Pilot bearing or bushing – supports the transmission input shaft in the crankshaft (often included, but check)
- Alignment tool – a plastic or metal splined tool that centers the disc during installation
Some kits also include the clutch fork, pivot ball, or flywheel bolts. Always verify the contents against your vehicle’s needs before ordering.
How the ZF5 Clutch Works
When you press the clutch pedal, hydraulic fluid pushes the release bearing against the pressure plate’s diaphragm spring, which lifts the pressure plate away from the clutch disc. This breaks the connection between the engine and transmission, letting you shift gears. When you release the pedal, the spring pushes the pressure plate back, clamping the disc between the plate and the flywheel, and power flows to the transmission. Over time, the friction material on the disc wears down, and the springs in the disc can fatigue, leading to slipping, shuddering, or difficulty shifting.
Signs You Need a New Clutch
Common symptoms of a worn ZF5 clutch include:
- Slipping – engine RPM rises but vehicle speed doesn’t increase, especially under load or in higher gears
- Hard shifting – gears grind or won’t engage, often caused by a worn disc or release bearing
- Clutch pedal feels different – pedal feels spongy, too high, too low, or vibrates
- Burning smell – a distinct odor of overheated friction material, often after heavy use
- Chatter or shudder – vibration when starting from a stop
If you notice any of these, inspect the clutch before it fails completely, which can damage the flywheel or transmission.
How to Choose the Right ZF5 Clutch Kit
Selecting the correct kit depends on your truck’s engine, transmission model, and how you use the vehicle. Here are the key factors:
- Identify the transmission model – Look for a tag on the transmission case or use the VIN to confirm whether you have an S5-42 or S5-47. The S5-47 is typically used behind diesel engines and has a different input shaft.
- Check the spline count – The clutch disc must match the input shaft spline. ZF5 transmissions commonly use a 1-1/8″ 10-spline input shaft, but some applications use a different count. Count the splines on the old disc or input shaft.
- Match the engine – The clutch must be rated for your engine’s torque. A stock replacement works for a stock engine; a performance clutch is needed for modified or high-torque engines.
- Decide on organic vs. ceramic – Organic discs are smooth and quiet, good for daily driving. Ceramic (or metallic) discs handle more torque and last longer but can be grabby and harsh for street use.
- Consider the flywheel – If the flywheel is scored, glazed, or cracked, it should be resurfaced or replaced. Some kits include a new flywheel, but many do not.
When in doubt, consult the vehicle’s service manual or a reputable parts supplier with your VIN.
Common Mistakes When Replacing a ZF5 Clutch
Replacing a clutch is a labor-intensive job, and a few common errors can lead to premature failure or a repeat job:
- Skipping the pilot bearing – A worn pilot bearing can cause noise and vibration, and it’s cheap to replace while you’re in there.
- Not resurfacing the flywheel – A smooth, flat flywheel surface is essential for proper clutch engagement. Glazing or grooves reduce friction and cause chatter.
- Mishandling the disc – Oily hands or dropping the disc can contaminate the friction material. Keep it clean and dry.
- Incorrect alignment – If the disc isn’t centered with the alignment tool, the transmission won’t slide in, or the disc may be damaged.
- Over-tightening pressure plate bolts – Always torque to spec, usually 35-45 ft-lbs, and use a crisscross pattern to avoid warping the pressure plate.
- Ignoring the release bearing – Always replace it with the clutch; a noisy bearing will fail soon after.
ZF5 vs. Other Transmissions
Compared to the older Ford Top Loader 4-speed or the later 5-speed manual transmissions, the ZF5 is heavier and stronger, designed for trucks and towing. It’s often paired with big-block gas engines or 7.3L Power Stroke diesels. The ZF5 has a reputation for being bulletproof, but its size makes clutch replacement more involved than in a car. Some owners convert to a hydraulic release bearing or a different clutch setup for easier pedal effort, but a stock replacement kit is fine for most drivers.
Installation Overview
Installing a ZF5 clutch kit is a major job that typically requires lifting the truck, removing the driveshaft, transmission, and transfer case (if 4WD). Here’s a simplified sequence:
- Disconnect battery and drain fluid – Safety first; also remove the shift lever and any wiring.
- Support the transmission – Use a jack and safety stands; the ZF5 is heavy.
- Remove the driveshaft and transfer case – Mark parts for reassembly.
- Unbolt and lower the transmission – Be careful of the input shaft and clutch linkage.
- Remove the old clutch and flywheel – Inspect the flywheel for damage.
- Install the new flywheel (if needed) and clutch – Use the alignment tool to center the disc, then torque the pressure plate bolts.
- Replace the pilot bearing and release bearing – Lubricate the release bearing pivot per the manual.
- Reinstall the transmission – Slide it in carefully, then reconnect everything.
If you’re not experienced with transmission work, have a professional do it – a mistake can damage the new clutch or cause a dangerous failure.
Frequently Asked Questions
What’s the difference between an S5-42 and S5-47 clutch kit?
The S5-42 is used behind gas engines, while the S5-47 is for diesel engines with higher torque. The clutch disc and pressure plate may have different spline counts or diameters, so they aren’t interchangeable without checking.
Can I use a clutch kit from a Ford F-150 on a ZF5?
No – the ZF5 is a heavy-duty truck transmission, and its clutch is larger than what a typical F-150 uses. Always get a kit specifically for your transmission model.
How long does a ZF5 clutch last?
It varies widely with driving habits and load. A stock clutch can last 100,000 miles or more with normal highway driving, but towing, off-road use, or aggressive driving can shorten that significantly.
Do I need to replace the flywheel with the clutch kit?
Not always, but the flywheel must be in good condition – flat and free of deep grooves or cracks. Many people resurface it or replace it when doing a clutch job to ensure even wear.
What is the torque spec for pressure plate bolts?
Typical spec is 35-45 ft-lbs, but always verify with the service manual for your specific vehicle and clutch kit. Over-tightening can warp the pressure plate.
Related
- Dual Clutch Transmission Cars: Full List & Guide
- Wet Dual Clutch Transmission Fluid: What It Is
- Wet Dual Clutch Transmission: How It Works
Further reading: none, this is general know-how. Details can change, so check the official page for anything that matters to you. Spotted a mistake? Tell us. How we write an answer.