Trendingat

02Home & Garden · Updated

How to Read a Tire DOT Number

Short answer

The DOT code tells you who made the tire and when

The DOT code is a series of letters and numbers molded into the tire sidewall. The last four digits are the most important: they reveal the week and year the tire was manufactured.

LocationOn the sidewall, near the rimExplained in: Common Mistakes
MeaningManufacturer, plant, size, dateExplained in: Step-by-Step
DateLast 4 digits = week and yearExplained in: Step-by-Step
Reading time4 min7 sections, about 860 words

What You’ll Need

  • A flashlight (to see the sidewall in dim light)
  • Optional: a magnifying glass if the numbers are small
  • Optional: your phone to take a photo for reference

Step-by-Step

  1. Find the DOT code. Look on the sidewall of the tire, near the rim. It starts with the letters “DOT” followed by a series of numbers and letters. If you can’t find it, rotate the tire slightly—it may be on the inner side facing the vehicle.
  2. Identify the full code. The DOT code is typically 10 to 12 characters long. For example: DOT M5H3 4XHR 2319. The first two characters after “DOT” are the plant code, the next two are the tire size code, and the next three or four are the brand and tire type. The last four digits are the date code.
  3. Focus on the last four digits. These four digits tell you the week and year of manufacture. The first two digits are the week (01 to 52), and the last two are the year. For example, “2319” means the 23rd week of 2019.
  4. Check for older tires. If your tire was made before 2000, the date code may only have three digits. A three-digit code means the tire was made in the 1990s. For example, “238” would be the 23rd week of 1998. Tires this old should be replaced immediately, regardless of tread depth.
  5. Use the date to assess tire age. Even if the tread looks good, tires degrade over time due to heat, UV exposure, and ozone. Most tire manufacturers and safety organizations recommend replacing tires that are 6 to 10 years old, regardless of tread depth.

Common Mistakes

  • Reading the wrong set of numbers. Some tires have additional numbers near the DOT code, like the tire size or load index. The DOT code always starts with “DOT” and is usually on the inner side of the tire.
  • Assuming the date is the last four digits of the entire sidewall text. The date is specifically the last four digits of the DOT code, not necessarily the last four digits on the sidewall.
  • Ignoring the date on a spare tire. Spare tires age too, even if they’ve never been used. Check the date on your spare as well.

Tips

  • Take a photo of the DOT code with your phone so you can zoom in and read it clearly.
  • Write down the date code and keep it in your glovebox or phone notes for future reference.
  • If you’re buying used tires, always check the DOT code to avoid buying tires that are already too old.
  • Remember that the DOT code is not the same as the tire identification number (TIN) used for recalls—though they are related.

Troubleshooting

  • Can’t find the DOT code? It may be on the inner side of the tire (facing the vehicle). If you can’t see it, you may need to jack up the car or turn the steering wheel to access it.
  • The numbers are worn off or faded. Try cleaning the sidewall with soap and water, or use a flashlight at an angle to highlight the embossed numbers. If they’re unreadable, the tire may be too old or damaged—consider replacement.
  • Only three digits after the DOT? That means the tire was made in the 1990s. Such a tire is far beyond its safe service life and should be replaced immediately.

Frequently Asked Questions

Why is the DOT code important?

The DOT code tells you the tire’s age, which is crucial for safety. Tires degrade over time, even if they look fine, and old tires are more prone to failure.

Can I tell the tire size from the DOT code?

No, the tire size is listed separately on the sidewall, usually in a format like “P215/65R15.” The DOT code contains a size code, but it’s not the same as the actual dimensions.

How old is too old for a tire?

Most experts recommend replacing tires that are 6 to 10 years old, regardless of tread depth. Some tire manufacturers say 10 years is the absolute maximum.

Does the DOT code indicate the tire’s speed rating?

No, the speed rating is a separate letter (e.g., H, V, W) found elsewhere on the sidewall, usually near the size.

Can I use the DOT code to check for recalls?

Yes, the DOT code includes the plant and date, which can help you identify if your tire is part of a recall. Check the NHTSA website for recall information.

Do all tires have a DOT code?

All tires sold in the United States for highway use must have a DOT code. It’s required by federal law.

Further reading: NHTSA. Details can change, so check the official page for anything that matters to you. Spotted a mistake? Tell us. How we write an answer.