02Home & Garden · Updated
How to Read a Tire Number (Size & Meaning)
Short answer
Read the sidewall code to get size, type, load, speed, and date
The tire number is a series of letters and numbers that tell you the tire's width, aspect ratio, construction, wheel diameter, load index, and speed rating. Reading it helps you choose the right replacement and understand what your tire can handle.
What You’ll Need
- Your vehicle’s tire (or a photo of the sidewall)
- A flashlight if it’s dark
- Optional: chalk or a marker to write down the code
Step-by-Step
- Find the tire number. Look at the sidewall of your tire, between the rim and the tread. It’s usually a series like P215/65R15 95H. If you can’t see it, turn the steering wheel to expose the front tire, or roll the car forward a bit to see the back.
- Identify the tire type letter. The first letter (or two) tells you the intended use. “P” means passenger car (P-metric), “LT” means light truck, “ST” means special trailer, and “T” means temporary spare. If there’s no letter, it’s a European metric tire, which is also common on cars.
- Read the three-digit width. The number right after the type letter (e.g., 215) is the tire’s width in millimeters from sidewall to sidewall at the widest point. This is the tread width, not the contact patch.
- Read the two-digit aspect ratio. The slash and next two numbers (e.g., /65) represent the sidewall height as a percentage of the width. So 65 means the sidewall height is 65% of 215 mm. A lower number means a shorter sidewall and a sportier feel.
- Check the construction letter. The next letter is usually “R” for radial, which is the standard for modern tires. “D” means diagonal (bias-ply) and “B” means belted bias. Radial is almost always what you’ll see.
- Read the wheel diameter. The two-digit number after the construction letter (e.g., 15) is the diameter of the wheel rim in inches. This must match your wheel size exactly.
- Note the load index and speed rating. After the diameter, you’ll see a number and a letter (e.g., 95H). The number is the load index—how much weight the tire can carry at maximum inflation. The letter is the speed rating—the maximum speed the tire can sustain. You can look up the exact load capacity in a chart, but the index number is what matters for matching.
- Find the date code. Look for a separate group of characters, often near the rim, starting with “DOT” (Department of Transportation). The last four digits are the week and year of manufacture. For example, 2319 means the 23rd week of 2019. Tires older than 6-10 years should be inspected by a professional, even if the tread looks fine.
Common Mistakes
- Mixing up the load index with the tire’s weight in pounds—it’s a code, not a direct measurement.
- Ignoring the speed rating and buying a lower-rated tire for a high-performance car.
- Assuming the number on the tire is the only thing that matters—your vehicle’s owner’s manual may specify a different size for optimal performance.
- Forgetting to check the date code on used tires; old tires can be unsafe even with good tread.
Tips
- Always replace tires with the same size and, ideally, the same speed rating as what came on the vehicle.
- If you change tire size (e.g., for larger wheels), use a tire size calculator to ensure the overall diameter stays close to original to avoid speedometer errors.
- Write down your tire size and keep it in your glovebox for quick reference when buying tires.
- Check your tire pressure monthly; the load index is only valid at the recommended pressure.
Troubleshooting
- Can’t find the number? It’s always on the sidewall, but sometimes on the inner side facing the car. You may need to crawl underneath or use a mirror.
- Number is worn off? Check the other side of the tire. If both are worn, look for a sticker on the driver’s door jamb or in the owner’s manual.
- Confused by extra letters/numbers? Some tires have additional markings like “M+S” (mud and snow) or “XL” (extra load). These are supplementary, not part of the core size.
- Not sure about the load index chart? You can find load index charts online, but for replacement, just match the number on your current tire.
Frequently Asked Questions
What does the “P” at the beginning mean?
It stands for “Passenger” car tire, as opposed to “LT” for light truck.
Can I change the aspect ratio (the second number)?
Yes, but it changes the tire’s diameter and can affect speedometer accuracy and ride comfort. It’s best to stick with the manufacturer’s recommendation.
What does the speed rating letter mean?
It indicates the maximum speed the tire can handle. For example, H is up to 130 mph, V is up to 149 mph, and Z is over 149 mph. Always use at least the rating your vehicle came with.
How do I know how old my tire is?
Look for the DOT code on the sidewall. The last four digits are the week and year of manufacture, e.g., 3218 means the 32nd week of 2018.
What if my tire has no “P” or “LT”?
It’s likely a European metric tire, which is also fine for most passenger cars. The size numbers still work the same way.
Do all four tires need to be the same size?
Yes, for safe handling and to avoid damaging the drivetrain, especially on all-wheel-drive vehicles. Always replace tires in sets of at least two, preferably four.
Related
- How to Get Rid of Zebra Mussels
- How to Read a Tire DOT Number
- Why Is the Sky Yellow in the Bronx? Causes Explained
Further reading: none, this is general know-how. Details can change, so check the official page for anything that matters to you. Spotted a mistake? Tell us. How we write an answer.