02Home & Garden · Updated
How to Read a Tire Date (DOT Code Explained)
Short answer
Find the DOT code, look at the last four digits
The last four digits of the DOT code on your tire's sidewall tell you the week and year it was made. For example, "2319" means the 23rd week of 2019.
Knowing how to read a tire date helps you determine how old a tire is, which is crucial for safety. Tires degrade over time, even if they look new and have plenty of tread. This guide will show you exactly where to look and how to decode the DOT code.
What You’ll Need
- Your vehicle (or just the tire if it’s off)
- A flashlight (sidewalls can be shadowed)
- Optional: a piece of chalk or tape to mark the spot
Step-by-Step
- Park on a flat surface and turn off the engine. Set the parking brake. If you’re checking a spare or a loose tire, place it on a clean, stable surface.
- Look at the sidewall of the tire. The sidewall is the smooth vertical area between the tread (the part that touches the road) and the rim (the metal wheel).
- Find the DOT code. It starts with the letters “DOT” followed by a series of letters and numbers. It’s usually on the lower part of the sidewall, near the rim. It may be on the inner side of the tire (facing the vehicle), so you might need to crawl under or turn the wheel. Use a flashlight if needed.
- Identify the last four digits. The DOT code is a mix of letters and numbers. The last four characters are the most important. They represent the date of manufacture.
- Decode the date. The first two of these four digits are the week of the year (01 to 52). The last two digits are the year. For example, “3218” means the 32nd week of 2018. “0522” means the 5th week of 2022.
- Check for older codes. If your tire was made before the year 2000, the date code will only have three digits. For example, “239” means the 23rd week of 1999. In this case, the tire is over 20 years old and should be replaced immediately.
- Calculate the age. Compare the date to today’s date. If the tire is more than 6 years old, have it inspected by a professional. If it’s more than 10 years old, replace it, regardless of tread depth.
Common Mistakes
- Misreading the entire DOT code: The full DOT code contains a plant code and other info, but only the last four digits are the date. Don’t try to decode the whole thing.
- Looking only at the outside sidewall: The DOT code might be on the inside of the tire, facing the car. You may need to get underneath or turn the steering wheel to see it.
- Confusing the date with other numbers: Tires have other numbers like size (e.g., P225/45R17) and load index. The date is always the last four digits after the DOT.
- Ignoring a tire that’s 10 years old but looks fine: Rubber degrades with age, leading to cracks and potential failure, even with full tread.
Tips
- Use a mirror or your phone’s camera to see the inside sidewall without crawling under the car.
- Check the spare tire too. Spares often sit unused for years and can be dangerously old.
- Take a photo of the DOT code for your records, especially when buying used tires.
- When buying new tires, ask for ones that are less than a year old. You can check the date before they’re mounted.
- If you can’t find the DOT code, it might be on the other side of the tire. All tires sold in the U.S. must have one.
Troubleshooting
- Can’t find the DOT code: Clean the sidewall with a cloth. The code is embossed in the rubber and can be dirty. If it’s still not visible, check the other side of the tire.
- The code is worn off: This can happen on very old tires. If you can’t read it, assume the tire is old and have it inspected or replaced.
- You see a three-digit code: This means the tire was made before 2000. It is definitely too old to use safely.
- The code has letters after the date: Some tires have a letter at the end, like “DOT … 2319X” – the “X” is not part of the date. Only the last four digits before any extra letters are the date.
Frequently Asked Questions
What does DOT stand for?
DOT stands for the U.S. Department of Transportation, which requires this code on all tires sold in the U.S.
How old is too old for a tire?
Most tire manufacturers and safety experts recommend replacing tires that are 10 years old, regardless of tread depth. Some recommend a professional inspection after 6 years.
Can I tell the age of a tire if the DOT code is only on one side?
Yes, the DOT code is only required on one sidewall. If you can’t find it on the outside, check the inside.
Do tires expire?
Yes, tires have a shelf life. The rubber compounds break down over time due to heat, oxygen, and ozone, leading to cracking and loss of strength.
Is it safe to buy used tires?
It can be, but always check the DOT code. Avoid any tire that is more than 6 years old, and look for cracks or damage.
Does the spare tire have a date code?
Yes, all tires, including spares, have a DOT code. Check it regularly, especially if you rarely use the spare.
Related
- Why Do Dogs Yawn When Petted? Causes Explained
- Car Shudders When Braking: Causes & Fixes
- How to Get Rid of Wasps Outdoors
Further reading: NHTSA. Details can change, so check the official page for anything that matters to you. Spotted a mistake? Tell us. How we write an answer.